The necessity of installing electronic fences in factories

The necessity of installing an electronic fence in the factory:

China's recognized world manufacturing center. However, many factories do not pay enough attention to security. There are tens of thousands of factories in the country, and there are hundreds of millions of lost stolen losses every year. There are still many economic losses that have not been reported. How to ensure the production and property safety of the factory, this problem has to be repeatedly mentioned by people. Some foreign-funded enterprises are located in factories in China, such as Intel, Motorola, Foxconn, etc. The security system is relatively well done, but from the perspective of China, Most of the factory security construction is still in its original stage. If the monitoring system is in short supply in all factories, then the burglar alarm system is just a few. Although some factories have anti-theft infrared alarms installed in fences, warehouses, financial offices, etc., some factories have only a few cameras or several alarm probes, or even only one security door, so the anti-theft effect is far from enough.

Second, the drawbacks of factories that do not have electronic fences installed:

1. The perimeter of the factory is large, and the intruder is easy to hide;

2. The price of property is high, and once it is invaded, the loss cannot be measured;

3. Ordinary security products should not have sufficient blocking effect.

Third, the advantages of factory installation electronic fence:

The electronic fence has a deterrent function: the fence and the warning sign give the intruder a deterrent effect and prevent it from committing crimes;

The electronic fence has strong active protection: when illegal elements invade, it will be effectively hit by electronic means to stop its illegal behavior; the electronic fence can prevent strict and dead angles: the installation of the front fence is not affected by the length, size and terrain of the perimeter. Easy to install, no dead ends. At the same time, it can also be installed on the ground, comprehensive protection, eliminate blind spots; low false alarm rate of electronic fence can work around the clock: intelligent alarm delay function can greatly reduce false positives. Small animals, branches and bad weather can still work normally, with low false positive rate, greatly reducing the number of unnecessary police officers; electronic fences and security, IT system network: easy to achieve with other security products through RS485 cable The linkage can also quickly connect to the network, greatly improving the security and intelligence of the security system; the electronic fence can be operated remotely: the host can be controlled by keyboard, software and local area network, which is convenient and quick.

The front fence is made of good materials. The products adopt the passenger-European X6 tension brand, pole, insulator, wire connector, warning sign, tensioner, lightning arrester, siren, base, in order to avoid rust, and durable. Benefits, the base is made of stainless steel, the screws are also made of stainless steel, the expansion screws are also made of stainless steel, and the insulators are made of ABS engineering plastic. In order to avoid the pulse voltage from being led to the fence, in the use of electronic fences, the state has regulations, the pulse voltage is not Guided to the fence, so each pole is equipped with 4 insulators, and is designed for the 4-wire fence to be used. The alloy wire will not fall out. The arrester will be grounded during the construction process. The bottom of the arrester will be connected to the grounding angle. The iron hit the ground 1 meter deep.

On the one hand, it is relatively stable. On the one hand, the pole needs a certain distance to be fixed. It can be installed more beautifully. The installation is inclined. The angle can be adjusted arbitrarily. Because the base is universally porous, the base is connected with the pole, and the construction personnel use the self-tapping screws. It is fixed.

With its unique performance, electronic fences are widely used in substations, photovoltaic power plants, water plants, factories, industrial heavy land, industrial and mining enterprises, material warehouses, residential quarters, villas, schools, airports, aquaculture sites, government agencies, and key cultural relics. Locations, military facilities, etc., with walls or iron guardrails.

Summary of the electronic fence composition:

The electronic fence system is mainly composed of three parts: the electronic fence main unit, the front end accessories and the back end control system. Usually, the electronic fence main unit is installed outdoors, along the original wall (such as brick wall, cement wall or iron fence), and the pulse host is usually outside, and the alarm signal is transmitted to the back-end control center through the signal transmission device.