Purchase tax incentives to enter the countdown will cost more to buy a car next year


Spread the attention of a car! After 2017, it will cost more to buy a car in 2018!

China's purchase tax preferential policies for passenger cars with a displacement of 1.6 liters or less will expire at the end of 2017. From January 1, 2018, vehicle purchase tax will be restored from the current 7.5% to 10%.

This means that it will cost more to buy a car next year!

Consumers want to take advantage of end-of-year incentive policies

The reporter visited the major car sales markets in Shijiazhuang and saw that many auto dealers have issued signboards indicating the countdown of purchase tax concessions to remind consumers and use them to promote sales.

Car Dealer Sales Manager: Usually sells more than 100 cars a month, and in November we sold more than 200 cars. It is estimated that there will be enough 300 vehicles to sell this month.

The rate of purchase tax returns from 7.5% to 10%. What is the concept?

New vehicle purchase tax = new car price (tax included) ÷ 1.17 (value-added tax rate 17%) × purchase tax rate

The recovery of the purchase tax rate by 10% means:

90,000 cars, you have to pay 1923 yuan more tax money.

For 110,000 cars, you have to pay 2,350 yuan more tax.

For 130,000 cars, you have to pay 2,778 yuan more tax.

150,000 cars, you have to pay 3205 yuan more tax.

200,000 cars, you have to pay 4,274 yuan more tax money.

And so on...

Simply give an example: Consumers buy a 200,000 yuan car, 1.6 liters or less.

The purchase of cars before December 31, 2017 can enjoy a 7.5% purchase tax discount: 200,000 ÷ 1.17 × 7.5% = 12,820.

After January 1, 2018, the purchase tax rate was restored to 10%. The purchase tax was: 200000 ÷ 1.17 × 10% = 17094 yuan.

Before and after the difference: 4274 yuan.

Buy a car New Deal reminds you to pay attention to these

Before we bought a new car, we could only go to a 4S shop or a gas station. Now, since the July 1 purchase of the New Deal, it has been promulgated to allow a variety of car sales forms to exist, including stores, online sales, and physical stores. This means that the time for buying a car is clearly marked.

1 Automobile certification must be accompanied by the car

The new "Automotive Sales Management Measures" stipulates that the car must be accompanied by a certificate of conformity.

2 prohibit all forms of fare increase

The New Deal stipulates that fees and charges be clearly stated in appropriate forms and that they may not increase sales or charge additional fees beyond the list price. If later in the collection of cars, encounter various cases of fare increase and so on, they can use legal weapons to protect their rights and interests.

3 Breaking regional sales restrictions

The New Deal stipulates that suppliers and distributors shall not limit the location of the consumer's household registration; they shall not impose restrictions on consumers' suppliers and after-sales service providers for auto parts and insurance, but the "three guarantees" service and recall of domestic auto products shall be borne by the supplier. Excludes the use of accessories and services.

4 It is forbidden to force consumers to buy accessories, etc.

The New Deal stipulates that dealers must not force consumers to purchase insurance when they sell cars, or force them to provide agency registration services. In case of bundled sales, you can complain!



High Frequency Welding Tube Mill

Our High Frequency Welding Tube Mill is intended for manufacturing of round pipe of Φ16mm-Φ127mm with thickness of 0.5 mm–5.0 mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths. 

Finished product can be of round, square or rectangular pipes.

High Frequency Welding Tube Mill

High Frequency Welding Tube Mill

a) High Frequency Welding Tube Mill Specifications:
Pipe diameter: Ø16–Ø127mm
Pipe Thickness: 0.5– 5.0mm
Pipe Length: 6-9m

Length Tolerance: 0-3mm

High Frequency Welding Tube Mill

b) High Frequency Welding Tube Mill Steel Tape Specifications:
Material: Low Carbon steel (δb≤500Mpa, δs≤235Mpa)

Inner diameter:   Î¦580-Φ610mm

Outer diameter:   Î¦900-1500mm
Strip steel thickness: 0.5mm-5.0mm

The maximum weight: 5.0 tons

High Frequency Welding Tube Mill

c) High Frequency Welding Tube Mill Electricity:
Dynamic power:  AC380V±10%, 3phases, 50Hz±10%
Control Power: AC220V±10%, one phase, 50Hz ±10%

Electric installed capacity: appro 450KW

High Frequency Welding Tube Mill

e) High Frequency Welding Tube Mill Cooling water:
Reservoir for High Frequency equipment:15 m³, one set
Reservoir for circulating cooling water:15 m³, one set
f) High Frequency Welding Tube Mill Compressed air:
Pressure: 0.4Mpa
Flow: 0.5m3/h

g) High Frequency Welding Tube Mill speed: 

30-90m/min

High Frequency Welding Tube Mill
Why choose to cooperate with us ?
1. We are professional manufacturer, so we can offer better price and after-sale service and shorter delivery time.
2. We have strong design & technical ability, we can design and manufacture as customer's requirement.
3. Our factory has been approved ISO 9001 certificate.
4. We have much experience for installation and training experience overseas.
5. We have successfully exported our machines to more than 90 countries, We all get good feedback.
6. We provide a free two years warranty for all our items.

7. OEM brand.

High Frequency Welding Tube Mill

High Frequency Welding Tube Mill FAQ:
1.How to get a quotation of tube rolling line ?
Give me the diameters and thickness for the pipe .
Other spicific requirements is welcome, such as the speed,power and voltage you want.
2. Terms of payment ?

30% T/T, Balance to be paid before shipping after inspection.Also we accept the payment L/C, O/A , D/P.

3. What is your after-sale service ?

High Frequency Welding Tube Mill warranty period is 24  months, if the broken parts can't be repaired, we can send new to replace for free, but you need to pay the express cost yourself. we supply the technical support for the whole life of the equipment.

4. How to visit your factory ?

a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.

Steel Pipe Roll Forming Machine

Steel Pipe Roll Forming Machine,Carbon Steel Pipe Making Machine, High Frequency Welding Pipe Making Machine,Steel Pipe Making Machine

Zhongtuo Roll Forming Machinery Co., ltd , https://www.frameforming.nl

Posted on