The "Hybrid TAC Mill EPH model" achieves the same accuracy, efficiency, and low resistance as the overall end mill.
Japan's Tungaloy listed a changeable end mill. Ensures the same blade length as the tool diameter. In addition, the shape of the cutting edge of the solid-end mill is reproduced by the three-dimensional shape of the rake face and the shape of the undercut groove surface based on the precision grinding. In this way, the same accuracy, efficiency and low resistance as the overall end mill are achieved. However, since the previous blade is short, a large cutting edge rake angle cannot be obtained and the resistance cannot be reduced. Therefore, this product can be applied to a processing field that has been using an integral end mill previously. In addition, the EPH model eliminates the need for re-grinding and tool length compensation required for the overall end mill, thus reducing costs. In addition, a variety of corner R (arc radius) cutters are available, and only one can be used for the entire milling cutter to the circular cutter. The fastening mechanism uses the newly developed "DD-FiT" (Double Direct Fixation Technology). This mechanism can be directly clamped from the upper part of the inserting part, and the rigidity of the inserting part and the blade body can be improved. Since the embedded part can be directly replaced with a fastening dowel, small dowels cannot be lost. The insert material has excellent defect resistance and wear resistance. It uses the new material "AH730" for machining of carbon steel and alloy steel, and fine-grained hard base material with excellent chipping resistance in aluminum alloy processing. DLC Coating process "DS1200". There are four blade models with tool diameters of 10 to 16 mm and 30 tool head models. In blade price, 2 blade "EPH11R010M10.0-2" with a tool diameter of 10mm is 24,465,600 yen (including tax), and 3 blade "EPH18R016M16.0-3" with a tool diameter of 16mm is 3,420 yen. (tax included). In terms of tool tip price, "AH730 XHGR110202ER-MJ" with a tool diameter of 10mm and an R (arc radius) of 0.2 is 1,470 yen (tax included).
Aluminum Die Casting Hardware Parts are a metal forming process in which molten aluminum metal is put under pressure and injected into a die. Aluminum weighs 1/3 of a comparable steel part. The Aluminum Parts would cost less to ship due to the weight and spend less expense than other manufacturing processes.
Aluminum Die Casting Hardware Parts are lightweight alloys that have good corrosion resistance, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Aluminum alloys possess high dimensional stability for complex shapes and thin walls.
Aluminum Die Casting Hardware Parts are efficient and economical and offers a wide range of durable shapes and components. Little or no machining is required after a part is die casted, because the process provides very close tolerances for even complex shapes. Aluminum Die Castings can also be easily plated or finished.Aluminum Die Casting Hardware Parts are dimensionally stable and heat resistant.Aluminum Die Casting Hardware Parts
Aluminum Die Casting of Hardware Parts, Aluminum Die Casting of Hardware, Aluminum Casting of Hardware Parts, Aluminum Castings of CNC Machining
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com
