Medium pressure air compressor pressure sensor 4 large installation precautions

In the medium-pressure air compressor, the pressure sensor is a relatively important component, and it has an important relationship with the normal operation of our equipment. The installation of the sensor will affect its use, so its installation is also very important. De Nair Xiaobian summarized the four major installation precautions for the medium-pressure air compressor, hoping to help everyone.
Medium pressure air compressor pressure sensor 4 large installation precautions:
1. Before the installation, an estimate should be made according to the actual situation of the whole network.
2. The installation of the medium pressure air compressor pressure sensor should be carried out along the cable.
3. In order to ensure the final safety, at least 4 pressure sensors should be installed for each cable. One end of each line should be installed, and each branch point should also be installed. The installation distance between the sensors should be less than 200m. The maintenance personnel quickly judge the point of failure.
4. The installation of the cable may be cut off on the ground, and a pressure sensor is preferably installed at the location where the change occurs.
After setting the installation position, it is also necessary to use a special instrument to detect the atmospheric pressure and the standard temperature, and obtain the frequency response value of the sensor to ensure that the reaction signal is normal, and then punch the hole installation (please pay attention to the selection when drilling The tool, grasp the size and ensure a good seal).

Shredder

SR series Single shaft shredder is a crushing machine with perfect design. It`s wide used and qualified to shred various waste materials such as plastic block & pipes, woven bags, cable, wood, paper, domestic rubbish, electronic waste and so on. The suitable screen can be chosen according to fed materials and the next processing requirement. The output material discharged by the shredder could be directly reused or further shred into small pieces. SR series shredder can be equipped with many different rotor and its rotor process requirements of cooling system, bead weld & wearing layer can also be additionally added according to customers` requests for disposing various waste materials.

Aluminum Shavings Shredder, Steel Shavings Shredder, Aluminum Shredder, Steel Shredder, Metal Shredder

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.yjhydraulicn.com