Yingxiu Xinzi is facing the test of heavy rain

Yingxiu Xinzizi faced heavy rain test diesel generator | diesel generator price / 2010-08-18

On the morning of the 18th, the reclamation and Xinzizi successfully blocked the flow of water from the Lancang River that leaked into Yingxiu New Town, Wenchuan County, Sichuan Province. The floodwaters in the city receded and dredging began. However, heavy rainfall from the 17th to the 18th increased the amount of water in the upper Minjiang River. The new child is facing a severe test.
At 17 o'clock in the afternoon on the 18th, Liu Qichen, secretary of the Sichuan Provincial Party Committee of the Chinese Communist Party, arrived in Yingxiu and performed on-site inspection and rescue work. Standing on the left bank of the Lijiang River across the river from Yingxiu New City, we can see that the river has turned and rolled up with black silt, and flew away from the flood discharge trough on both sides of the dam. Zixu was built along the long running water on the upstream side of Yingxiu New Town to form a separation zone, so that the river rushed to the front corner of the new city, passed the city and flowed back to the original Lancang River.
Liu Qizhen asked questions about the amount of flood discharge, the effect of the explosion, and the flood control ability of flood protection embankments. After learning that Xinjian Zi could break the embankment under the impact of the surging river, Liu Qizhuo stood on a bank of muddy rivers and said: "We must reinforce Yingxiu flood embankment, make it impregnable, and fail to stop the embankment."
The weather is dark and showers are approaching. Liu Qilu watched the blasting at the scene. He stressed that he must resolutely win the fight against the massive landslides and mudslides, swear to defend the safety of people's lives and property, and vowed to defend the recovery and reconstruction results after the disaster.
At present, emergency rescue officers and soldiers continue to use sandbags, rocks, iron cages, etc. to reinforce their sons and ensure the safety of Yingxiu New Town.
It is reported that from the 14th to the 18th, Liu Qilu has gone to Yingxiu four times, and both went to Qingping to command flood fighting and rescue.
On August 13, a mudslide occurred in Qingping Township, Mianzhu City, Sichuan Province. Thousands of people were trapped. On the morning of the 14th, Liu Qilu went to the town of Qingchang Township, where he suffered heavy rain. He guided the work in the disaster area until late at night.
From the evening of the 13th to the early morning of the 14th, heavy rains occurred in the epicentre of the May 12 earthquake and caused 16 mudslides in the county. Mudstone entered the Lancang River to form a dam body, causing the river to divert and flow into Yingxiu Town, which is being rebuilt. On the morning of the 15th, Liu Qichen went to Yingxiu Town in the disaster-stricken area of ​​mudslides. He climbed over a dozen meters of dammed body and inquired about the construction plan.
On the afternoon of the 16th, Liu Qichen went to Yingxiu to enter the town and inspected some houses that were hit by floods. He asked local officials to organize personnel to clear the silt and do a good job of disinfection and epidemic prevention.
On the morning of the 17th, Liu Qixi rushed to Qingping Township to check on the status of water flow and congestion. Afterwards, they rushed to Yingxiu Town to study ways to divert water back to the river and allow Yingxiu Town to avoid the next flood.
On the afternoon of the 18th, Liu Qichen went to Yingxiu for the 4th time and repeatedly stressed the need to do everything possible to ensure the safety of Yingxiu New Town. (Finish)
Next:Installation, use and regulation of marine diesel generator sets
Previous:Two burglars in Hangzhou guarded the high-speed rampage by stealing

Floating Head Heat Exchanger

Floated type shell&tube heat exchanger is mostly used for large temperature fluctuations and temperature differences, compared with Fixed Tube Heat Exchanger, its structure is more complex and more expensive.



One end of the tube is fixed on an immobile Tube Sheet, which is clamped between the shell Flange and the tube flange, and is connected by bolts; the other end of the tube is fixed on a floating head tube sheet, which is clamped between the floating cover and the hook ring connected by studs, forming a floating head that can move freely in the shell.



If the tube bundle and the shell are heated and elongated, they do not affect each other, so there is no temperature difference stress. The floating part is a detachable connection consisting of the floating tube sheet, hook ring and floating cover. It is easier to take the tube bundle out, and the tube can be cleaned both inside and outside and is easy access.

Floating Head Heat Exchanger,Floating Head Exchanger,Floating Head Type Heat Exchanger,Floating Tubesheet Heat Exchanger

Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com

Posted on