1. Condensers
2. Can be customerized
3. Work Pressure: 0.2~3.1MPa
4. Fin space: 1.2~3.5mm
5. Tube Diameter: 7, 9.52, 12.7, 16mm.
We are a professional heat exchanger, condenser, evaporator and heat pump manufacturer
 in China,which has more than 15 years experience in HVAC area. Our products have been exported to Europe,USA, Japan and Middle east etc.Â
Packing detail:We accept you package design,if you have special demand,if not,
we will provide an individual package for you.
The technology to create perfection:
1.The fins produced are of vry high standard of quality having flare position made of plain,
wave type.
2.The edge of fins can be straight or ripple depending upon application.
3.All the coils are 100% tested for leakages and passed through the heating oven with ht air circulation for inside and ourtside cleaning and charged nitrogen.Â
4.The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of co-densers and evaporators.
5.The row material of excellence:We source only the best quality raw material from aroud the world,,to manufacture heat exchangers that are of globally acceptable standards.
6.Plain copper pipe of 7mm,7.94mm,9.52mm and 12.75mm diameter.
7.Aluminum foil in blu color with hydrophilic and bio(Health) properties.
Features:
1. material :copper , aluminum ,galvanized plate
2. aluminum foil: hydrophilic or bare
3. fin type: louver fin or flat fin or corrugated fin
4. copper pipe: diameter 7mm or 8mm or 9.52mmor 12.75mm or 15.888mm ,grooved or smooth tube
5. pitch of fins can be adjusted between 1.8-5.8mm.
6. pitch of holes and pitch of rows : 25*21.65MM and 12.7*19.05MM
7. suitable for R134A, R22, R404A, R407C refrigerant and so on
8. voltage: 220V/1/50HZ and 380V/3/50HZ or other type.
9. different alternative condensing fans available: shaded pole or outer rotor fan motor.
10.did gas examination under 3.0Mpa air pressure to ensure the tightness.
11.widely used in refrigeration industry, cold room and other cooling system.
12. we can supply products as per customized samples or drawing.
13.producing procedure: tube bending, punching fin, expanding, digressing, drying
Welding, leakage test, bending, inspection, packing
| Item | Condensers Type | Operation medium | Operation pressure ( MPa ) |
Application |
| 1 | Φ 16/Φ 9.52/Φ 12.7 Copper tube with aluminium fin |
Cold/hot water | ≤ 1.6 | Used for combined air handling unit, fan coil etc air conditioning devices |
| 2 | Φ 18/Φ 20 Steel pipe winding with steel sheet |
Steam | ≤ 0.2 | Used for combined air handling unit, fan coil etc air conditioning devices |
| 3 | Φ 16/Φ 9.52/Φ 12.7 Copper tube with aluminium fin |
Brine | ≤ 1.6 | Used for heat transfer in cold storage and all kinds of low temperature systems |
| 4 | Φ 9.52/Φ 7.94/Φ 7 Copper tube with aluminium fin |
Ethylene glycol | ≤ 1.6 | Used of energy recovery and low temperature system devices |
| 5 | Φ 16 Copper tube with aluminium fin |
Ice mud | ≤ 1.6 | Used for dry operation condition, fresh air dehumidification etc systems |
| 6 | Φ 9.52/Φ 7.94/Φ 7 Copper tube with aluminium fin |
R22 | ≤ 1.9 | Used for industry and commerce air conditioning system |
| 7 | Φ 9.52/Φ 7.94/Φ 7 Copper tube with aluminium fin |
R407C | ≤ 1.9 | Used for industry and commerce air conditioning system |
| 8 | Φ 9.52/Φ 7.94/Φ 7 Copper tube with aluminium fin |
R134a | ≤ 3.1 | Used for vehicle and vessel etc transportation devices |
| Fin Pattern | Copper Tube O.D.(mm) | Row Space(mm) | Hole Space(mm) | Fin Thickness(mm) Â |
Fin Space(mm) | ||||
| Flat fin | Sine wave with blade fin | Smooth sine wave fin | Window fin | Sesamoid fin | |||||
| A | 7 | 12.7 | 21 | 0.105 | / | / | 1.3 | 1.3 | / |
| B | 7 | 13.2 | 17.6 | 0.105 | / | / | 1.3 | 1.3 | / |
| C | 7 | 12.7 | 20.4 | 0.105 | / | / | 1.3~1.8 | 1.3~1.8 | / |
| D | 7.94 | 15.88 | 25.4 | 0.105 | 1.8~3.0 | 1.8~3.0 | 1.8~3.0 | 1.8~3.0 | / |
| E | 7.94 | 19.05 | 22 | 0.105~0.13 | 1.4~3.0 | 1.4~3.0 | 1.4~3.0 | 1.4~3.0 | / |
| E | 9.52 | 22 | 25.4 | 0.105~0.15 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | / |
| F | 9.52 | 22 | 25.4 | 0.18~0.4 | 3.5~6.35 | / | / | / | / |
| G | 9.52 | 21.65 | 25 | 0.105~0.18 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | / |
| H | 9.52 | 21.65 | 25 | 0.15~0.24 | 3.2~6.35 | 3.2~6.35 | 3.2~6.35 | / | / |
| I | 12.75 | 27.5 | 31.75 | 0.115~0.15 Â |
1.5~3.5 | 1.5~3.5 | 1.5~3.5 | 1.5~3.5 | 1.6~3.2 |
| J | 15.88 | 33 | 38.1 | 0.115~0.15 | 1.5~4.0 | 1.5~4.0 | 1.5~4.0 | / | / |
| K | 15.88 | 34.64 | 40 | 0.115~0.15 | / | 2.6~3.5 | 2.6~3.5 | / | / |
Contact me
Ruby Yang
Mobile: +86 15538183231Â Brief description:
1. Condensers
2. Can be customerized
3. Work Pressure: 0.2~3.1MPa
4. Fin space: 1.2~3.5mm
5. Tube Diameter: 7, 9.52, 12.7, 16mm.
We are a professional heat exchanger, condenser, evaporator and heat pump manufacturer
 in China,which has more than 15 years experience in HVAC area. Our products have been exported to Europe,USA, Japan and Middle east etc.Â
Packing detail:We accept you package design,if you have special demand,if not,
we will provide an individual package for you.
The technology to create perfection:
1.The fins produced are of vry high standard of quality having flare position made of plain,
wave type.
2.The edge of fins can be straight or ripple depending upon application.
3.All the coils are 100% tested for leakages and passed through the heating oven with ht air circulation for inside and ourtside cleaning and charged nitrogen.Â
4.The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of co-densers and evaporators.
5.The row material of excellence:We source only the best quality raw material from aroud the world,,to manufacture heat exchangers that are of globally acceptable standards.
6.Plain copper pipe of 7mm,7.94mm,9.52mm and 12.75mm diameter.
7.Aluminum foil in blu color with hydrophilic and bio(Health) properties.
Features:
1. material :copper , aluminum ,galvanized plate
2. aluminum foil: hydrophilic or bare
3. fin type: louver fin or flat fin or corrugated fin
4. copper pipe: diameter 7mm or 8mm or 9.52mmor 12.75mm or 15.888mm ,grooved or smooth tube
5. pitch of fins can be adjusted between 1.8-5.8mm.
6. pitch of holes and pitch of rows : 25*21.65MM and 12.7*19.05MM
7. suitable for R134A, R22, R404A, R407C refrigerant and so on
8. voltage: 220V/1/50HZ and 380V/3/50HZ or other type.
9. different alternative condensing fans available: shaded pole or outer rotor fan motor.
10.did gas examination under 3.0Mpa air pressure to ensure the tightness.
11.widely used in refrigeration industry, cold room and other cooling system.
12. we can supply products as per customized samples or drawing.
13.producing procedure: tube bending, punching fin, expanding, digressing, drying
Welding, leakage test, bending, inspection, packing
| Item | Condensers Type | Operation medium | Operation pressure ( MPa ) |
Application |
| 1 | Φ 16/Φ 9.52/Φ 12.7 Copper tube with aluminium fin |
Cold/hot water | ≤ 1.6 | Used for combined air handling unit, fan coil etc air conditioning devices |
| 2 | Φ 18/Φ 20 Steel pipe winding with steel sheet |
Steam | ≤ 0.2 | Used for combined air handling unit, fan coil etc air conditioning devices |
| 3 | Φ 16/Φ 9.52/Φ 12.7 Copper tube with aluminium fin |
Brine | ≤ 1.6 | Used for heat transfer in cold storage and all kinds of low temperature systems |
| 4 | Φ 9.52/Φ 7.94/Φ 7 Copper tube with aluminium fin |
Ethylene glycol | ≤ 1.6 | Used of energy recovery and low temperature system devices |
| 5 | Φ 16 Copper tube with aluminium fin |
Ice mud | ≤ 1.6 | Used for dry operation condition, fresh air dehumidification etc systems |
| 6 | Φ 9.52/Φ 7.94/Φ 7 Copper tube with aluminium fin |
R22 | ≤ 1.9 | Used for industry and commerce air conditioning system |
| 7 | Φ 9.52/Φ 7.94/Φ 7 Copper tube with aluminium fin |
R407C | ≤ 1.9 | Used for industry and commerce air conditioning system |
| 8 | Φ 9.52/Φ 7.94/Φ 7 Copper tube with aluminium fin |
R134a | ≤ 3.1 | Used for vehicle and vessel etc transportation devices |
| Fin Pattern | Copper Tube O.D.(mm) | Row Space(mm) | Hole Space(mm) | Fin Thickness(mm) Â |
Fin Space(mm) | ||||
| Flat fin | Sine wave with blade fin | Smooth sine wave fin | Window fin | Sesamoid fin | |||||
| A | 7 | 12.7 | 21 | 0.105 | / | / | 1.3 | 1.3 | / |
| B | 7 | 13.2 | 17.6 | 0.105 | / | / | 1.3 | 1.3 | / |
| C | 7 | 12.7 | 20.4 | 0.105 | / | / | 1.3~1.8 | 1.3~1.8 | / |
| D | 7.94 | 15.88 | 25.4 | 0.105 | 1.8~3.0 | 1.8~3.0 | 1.8~3.0 | 1.8~3.0 | / |
| E | 7.94 | 19.05 | 22 | 0.105~0.13 | 1.4~3.0 | 1.4~3.0 | 1.4~3.0 | 1.4~3.0 | / |
| E | 9.52 | 22 | 25.4 | 0.105~0.15 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | / |
| F | 9.52 | 22 | 25.4 | 0.18~0.4 | 3.5~6.35 | / | / | / | / |
| G | 9.52 | 21.65 | 25 | 0.105~0.18 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | / |
| H | 9.52 | 21.65 | 25 | 0.15~0.24 | 3.2~6.35 | 3.2~6.35 | 3.2~6.35 | / | / |
| I | 12.75 | 27.5 | 31.75 | 0.115~0.15 Â |
1.5~3.5 | 1.5~3.5 | 1.5~3.5 | 1.5~3.5 | 1.6~3.2 |
| J | 15.88 | 33 | 38.1 | 0.115~0.15 | 1.5~4.0 | 1.5~4.0 | 1.5~4.0 | / | / |
| K | 15.88 | 34.64 | 40 | 0.115~0.15 | / | 2.6~3.5 | 2.6~3.5 | / | / |
Contact me
Ruby Yang
Mobile: +86 15538183231Â
Bushing Parts,Lower Arm Bushing,Auto Arm Bushing
Xiangren Industry & Trade Co., Ltd. , http://www.hbfuelsystem.com