Surgical Microscope for Dentistry

  • Model NO.: YZ20P5
  • Principle: Optics
  • Trademark: new vision
  • Specification: CE, US FDA
  • HS Code: 9018500000
  • Stereoscopic Effect: Stereoscopic Effect
  • Illumination: Halogen
  • Transport Package: Standard Export Airworthy and Seaworthy Package
  • Origin: Suzhou
Operation Microscope for ENT and Dentristry
Model: YZ20P5
CE & US FDA approved
Surgical Microscope for Dentistry    
The product is a simple coaxial illumination operation microscope for one man. It is portable, compact and applied in mobile hospital.

All the lenses are multi-coated, mildewproof and anti-reflective.
Surgical Microscope for Dentistry

Optional objectives: f250/f300/f350f/f400.
Surgical Microscope for Dentistry

Characteristics:
· All the lenses are multi-coated, mildewproof and anti-reflective.
· Optional objectives: F250/f300/f350f/f400.
· Column stand can be reflitted to holding stand. It can also be customized according to various operation requirements.

Available for digital /video recording during surgery
It can be upgrade to digital by attaching a video recording system: beam splitter, video adapter, video camera, imaging capture card and professional software.

and can use surgery trolley to mount the monitor in the operating zoom
Surgical Microscope for Dentistry

 
 
Specifications:
Eyepiece Magnification  12.5×
Objective Lens f=200
Working Distance 190mm
Magnifications for Main Microscope 5.3×\8×\12×
Diameter of Field F37mm\F25mm\F16.7mm
Diopter Adjustment ±7D
Pupil Distance 50mm~80mm
Maximal Resolution 100LP/mm
Illumination Source 12V/100W,medical cold reflection halogen lamp 
Illumination Type 6°+0°Coaxial cold light source illumination
Coaxial Illumination ≥30000lx
Reaching Radius of Arm 870mm
Adjustable Vertical Range 700mm~1100mm
Fine Focusing Range 30mm
Input Voltage AC220V±22 V / 50Hz±1Hz\AC110V±11V /60Hz±1Hz
Power 120VA
Fuse AC250V T1.25A \AC125V T2.5A
Electrical Safety Standard Executive Standard: GB9706.1-2007\type I
Packing Volume 0.2m 3 ,1carton
Total Weight 41kg

Forklift Mast Rollers are generally found running between the inner masts and four lift mast rollers run between the outer and the inner masts. The mast is located at the frontal part of a forklift and its purpose is to raise and lower loads. The mast rollers transforms the forces and moments that derive from the fork carrier, into the mast and into the frame. It is an extremely important component of the mast as it enables the vertical movement of the fork carriers, while maintaining its structural rigidity.
 
Mast rollers are available in two fitting series, HULR and LRQ. HULR series consists of two rows of contact Ball Bearings. Whereas, LRQ series consists of a single row of four point contact ball bearings. The bearings are structurally engineered to be capable of supporting great axial, radial, and moment forces. The rollers have crowned outside surface that consists of outer rings, which prevents edge loads, due to the possibility of a misalignment. While the inner roles are designed to be of a singular piece to be easily installed, which translates to cost savings.

Forklift Main Roller Bearing

Forklift Main Roller Bearing,Steel Roller Forklift Main Bearing,Bearing For Forklift Truck ,Roller Bearing For Forklift

Ningbo Ritbearing Imp & Exp Co.,Ltd. , http://www.ritbearingchina.com

Posted on