Diesel engine sales decline in the first half of the year
Automotive diesel engines are used as a class of automotive engines, most of which are used in commercial vehicles and are subject to macroeconomic factors. In 2011 and 2012, the sales volume of commercial vehicles in China declined, and the sales volume of automotive diesel engines continued to decline in these two years. In the first half of this year, the sales of commercial vehicle and vehicle diesel engines rebounded.
According to the data, in 2011 and 2012, the sales of automotive diesel engines continued to decline, from 3.999 million units in 2010 to 3.3952 million units in 2012, and fell by 15.0% in the entire two years. Its sales volume accounted for less than 20% of the total sales of automobile engines, which was 19.4% in 2012, and 23.5% and 22.1% in 2010 and 2011 respectively.
In the first half of this year, sales volume of automotive diesel engines increased by a cumulative increase of 10.9% to 1.9392 million units, but the growth rate was lower than the overall average level of automotive engines. As a result, the proportion of its sales volume still decreased year-on-year, slightly dropping by 0.2 percentage point to 19.5%.
Obvious polarization of market concentration
After two years of ebbing, the market for automotive diesel vehicles showed a polarization: Most of the sales of higher-volume companies grew, while those of the lower-volume companies fell. In the first half of this year, the concentration of the top ten companies in the market has clearly improved. The sales volume of the top ten companies totaled 1,687,400 units, with a concentration of 87.0%, up 2.6 percentage points year-on-year.
In the first half of this year, the top ten companies in this market were Yuchai, Weichai, Quanchai, FAW, Jiangling, Yunnei Power, Dongfeng Motor (Dongfeng Motor Co., Ltd.), Lai Dong, Beiqi Foton and Dongfeng Chaochai. Among them, the sales of the top four companies exceeded 200,000 units, a total of 1,135,900 units, accounting for 58.6% of the total market, up 4.5% year-on-year; Jiangling and Yunnei had sales of more than 100,000 units, while sales of other companies were all ten. Millions below.
Yunnei Power and Chaoyang Chaoyang sales decline
Among the top four companies, Yuchai’s sales volume increased by 21.7% to 377,700 units in the first half of the year, far exceeding that of other companies and making it the top spot. Weichai ranked third in the same period last year. In the first half of this year, sales increased by 34.3% to 283,300 units, which surpassed Quanchai and ranked second. Total diesel sales rose 16.6% to 252,300 units, ranking third. Ranked No. 4 in FAW, its sales in the first half increased by 6.9% to 222,400 units.
Among the companies ranked fifth to tenth, both Yunnei Power and Dongfeng Chaochao's sales fell, and their rankings also declined. In the first half of the year, Yunnei's sales fell by 5.7% to 108,900 units. It was overtaken by Jiangling (11.38 million units), ranking one place down to sixth; Dongfeng Chaochao's sales fell by 12.3% to 72,700 units, and Laifeng (8.72 million units). ) and Beiqi Futian (78,000 units) exceeded, ranking from eighth to tenth.
The sales of diesel engines for Jiangling, Dongfeng Motor , Laidong and Beiqi Foton all increased. Among them, the sales growth of Beiqi Foton was the highest, up 26.9% year-on-year; followed by Laiwu, sales increased 13.8%; Jiangling and Dongfeng Motor increased by 7.3% and 4.0% respectively.
Tungsten carbide pellets are small, cylindrical or spherical shapes made from tungsten carbide, a hard and dense material. These pellets are typically used in various industrial applications, such as drilling, grinding, cutting, and wear-resistant components.
Tungsten carbide is a compound of tungsten and carbon, known for its high hardness, strength, and resistance to wear and corrosion. It is often used as a cutting tool material, as well as in the production of mining and drilling equipment.
The pellets are usually produced through a process called powder metallurgy, where Tungsten Carbide Powder is mixed with a binder material and then compacted under high pressure. The compacted pellets are then sintered at high temperatures to form a solid and durable product.
Tungsten carbide pellets are used in various industries, including mining, construction, oil and gas, and manufacturing. They are commonly used as inserts in drilling bits, cutting tools, and wear-resistant parts, providing high performance and extended tool life.
Overall, tungsten carbide pellets are essential components in many industrial applications, offering superior hardness, strength, and wear resistance.
Carbide Pellets,Cemented Carbide Pellets,Tungsten Carbide Pellets,Tungsten Carbide Alloy Pellet
Luoyang Golden Egret Geotools Co., Ltd , https://www.egretgeotools.com