1. Strictly observe the relevant regulations for the handling, transportation and transportation of flammable, explosive and chemical dangerous goods. For the handling of powdered materials and toxic gas emissions, the necessary protective equipment should be worn.
2. Before work, you should carefully check whether the tools used are in good condition and are not allowed to be overloaded.
3. When loading and unloading, it should be lightly loaded and lightly placed. It should not be lightly pressed, large and not small, and the stacking is stable and the binding is firm.
4. Manual handling, loading and unloading items should be staffed according to the weight of the items. Tools such as bars, springboards, and ropes must be in good condition. When multiple people carry the same object, they must have a special person to command, and keep a certain interval, all the way, consistent.
5. Stacked objects should not be skewed, the height should be appropriate, and the easy sliding parts should be plugged with wooden blocks. It is not allowed to stack objects in the safety lane.
6. When transporting goods by motor vehicles, they must not be overloaded, super high, super long and extra wide. In the case of ultra-high, wide and long-term shipments, it is necessary to have reliable measures and obvious signs in accordance with traffic safety management regulations.
7. When loading the vehicle, the driver should pay attention to the standing position. When the vehicle is driving, it is not allowed to stand between the object and the front fence. The car is not stopped and is not allowed to go up and down.
8. The loading and unloading cargo should be hung with the specified lifting point. When lifting the packing box, first check whether the bottom of the box body is firm and intact, hang it according to the hanging line mark, and lift it after the test crane is confirmed to be safe.
9. When using the hoist and steel pipe to roll and slip the goods, it is necessary to have a special person to command, the road surface should be solid and flat, the ropes should be tied to the center of gravity, and the straight line should be maintained. The angular fast-mouth part should be provided with a lining, and the unloading or downhill should be equipped with a safety rope. , before and after the cargo and the traction wire rope is not allowed to stand.
10. It is strictly forbidden to mix with other goods when shipping flammable and explosive chemical dangerous goods. It is necessary to move gently and the smoking place is not allowed. No one is allowed to sit in the compartment.
11. When loading and unloading, pay attention to the standing position according to the change of the hanging position. Do not stand under the hanging object.
12. Rail vehicle shipments shall not exceed the permitted height and width of the carriage. Within 1.5 meters on both sides of the railway, loading and unloading objects shall not be piled up, and it is not allowed to rest under the car or on the top.
13. When loading and unloading the cargo in the high-bar compartment, the driver cannot see the command signal in the compartment, and the intermediate command should be set to correctly transmit the signal.
——Excerpt from the “Safety Technical Operation Regulations for Mechanical Workersâ€
2. Before work, you should carefully check whether the tools used are in good condition and are not allowed to be overloaded.
3. When loading and unloading, it should be lightly loaded and lightly placed. It should not be lightly pressed, large and not small, and the stacking is stable and the binding is firm.
4. Manual handling, loading and unloading items should be staffed according to the weight of the items. Tools such as bars, springboards, and ropes must be in good condition. When multiple people carry the same object, they must have a special person to command, and keep a certain interval, all the way, consistent.
5. Stacked objects should not be skewed, the height should be appropriate, and the easy sliding parts should be plugged with wooden blocks. It is not allowed to stack objects in the safety lane.
6. When transporting goods by motor vehicles, they must not be overloaded, super high, super long and extra wide. In the case of ultra-high, wide and long-term shipments, it is necessary to have reliable measures and obvious signs in accordance with traffic safety management regulations.
7. When loading the vehicle, the driver should pay attention to the standing position. When the vehicle is driving, it is not allowed to stand between the object and the front fence. The car is not stopped and is not allowed to go up and down.
8. The loading and unloading cargo should be hung with the specified lifting point. When lifting the packing box, first check whether the bottom of the box body is firm and intact, hang it according to the hanging line mark, and lift it after the test crane is confirmed to be safe.
9. When using the hoist and steel pipe to roll and slip the goods, it is necessary to have a special person to command, the road surface should be solid and flat, the ropes should be tied to the center of gravity, and the straight line should be maintained. The angular fast-mouth part should be provided with a lining, and the unloading or downhill should be equipped with a safety rope. , before and after the cargo and the traction wire rope is not allowed to stand.
10. It is strictly forbidden to mix with other goods when shipping flammable and explosive chemical dangerous goods. It is necessary to move gently and the smoking place is not allowed. No one is allowed to sit in the compartment.
11. When loading and unloading, pay attention to the standing position according to the change of the hanging position. Do not stand under the hanging object.
12. Rail vehicle shipments shall not exceed the permitted height and width of the carriage. Within 1.5 meters on both sides of the railway, loading and unloading objects shall not be piled up, and it is not allowed to rest under the car or on the top.
13. When loading and unloading the cargo in the high-bar compartment, the driver cannot see the command signal in the compartment, and the intermediate command should be set to correctly transmit the signal.
——Excerpt from the “Safety Technical Operation Regulations for Mechanical Workersâ€
1D auto parts , https://www.1dauto.com