First, to the car sun "sunbathing"
The sunbathing method can be used for commercial vehicles whose air-conditioner odor is not very serious. The driver can drive the car to the sun under bright sunny weather, then turn on the air-conditioning system to the warm windshield, and finally turn the air volume to the maximum. The business car's doors and windows will all be opened, and it will be able to be sunk for more than ten minutes. Way to do this than just to take advantage of free ultraviolet disinfection will be conducted within the commercial vehicle, but also allows the hot air to a wind tunnel to make a dirty air circulate. The biggest advantage is that it does not cost money. The biggest disadvantage is that this method can only eliminate weak odors.
Second, replace the air filter
The air-conditioning filter of a commercial vehicle is a place that is easily overlooked by drivers. Even more driver friends do not even need to replace the air-conditioning filter. It is necessary to replace the air-conditioning filter regularly or to clean it. If the air-conditioning filter in the car is already It becomes very dirty, not only does not achieve the effect of filtering dirty air, but also causes pollution in the air inside the car.
Under normal normal conditions, the service life of the original air-conditioner filter of a commercial vehicle is one year or 30,000 kilometers. If the environment in which the commercial vehicle is driven is often on a road with a relatively polluted environment, then the air-conditioning filter The replacement cycle will also be shortened. Especially for those who often smoke in the car, it is more important to regularly replace the air conditioning filter. In fact, it is very simple for the owners to clean the air-conditioning filter by themselves. Most of the air-conditioning filters for small vehicles are installed under the front windscreen of the car. The removed filter is blown clean with elegant Qi. After drying in the sun for a few hours, the purpose of removing odors can be achieved. However, if those filters that are heavily polluted cannot be cleaned, then a thorough replacement is required.
Third, clean the air duct
If there are many bacteria remaining in the air duct, it will make the air conditioner emit unpleasant odors. Then there is a relatively simple way to get rid of the odor of the air duct, and use the air-conditioning duct cleaning agent. Now there are many fungicides in the market that sell a lot of different brands of cleaning air passages, prices are ranging, there are dozens of cheap, expensive, there are hundreds of blocks, business owners can buy according to their own needs. The method of self-cleaning is also very convenient. After the commercial vehicle is left in a relatively good air environment, the external circulation switch is turned on, and then the air conditioner is adjusted to the natural air change block, and the cleaning agent is sprayed evenly toward the air outlet. At the entrance, the windows and skylights can be ventilated after a few minutes. In the same way, this method is not suitable for air-conditioning ducts that are polluted more severely. If it is a friend who has not cleaned the air duct for a long time, it is still a thorough photocatalyst and steam sterilization in the 4S store. effect. (Text / Sun Ni)
Plastic 3D Printing is one of the fastest and most cost-effective methods available for the iterative design, prototyping, and production of custom parts. Rather than the material being removed from stock, as historically done with subtractive manufacturing processes such as CNC Machining, 3D printing works by repeatedly layering small amounts of plastic to build a design from the ground up.
First, when choosing to use plastic to 3D print your project, you will quickly notice that you have the choice among various plastic materials with different properties.
Pros
Affordable to the average person
Fast prototyping
Creates sturdy and lightweight parts
Reduced waste compared to Injection Molding
Ability to print on demand
Fast production for small parts runs
Unlimited designs can be made
Excellent for creating custom products
Easy to access for small businesses and individuals
Not limited to plastics, metals are also used
Machines available on levels from hobby to industrial
Promotes creativity and learning in children
3D Printing Applications for Plastics
Prototyping
Solutions that streamline workflow to accelerate digital design, create appearance models and build functional prototypes.
Production
Additive manufacturing at scale for plastic parts is now a reality, with the productivity, durability, repeatability, and lower total cost of operation manufacturers require.
Investment Casting
Accelerate the delivery of high-quality metal products and casting patterns with 3D printed wax and SLA casting patterns.
Jigs and Fixtures
Produce accurate jigs and fixtures with 3D printing to provide a fast and cost-effective way to advance your manufacturing process.
Plastic 3D Printing,Versatile Plastic 3D Printing,Plastic 3D Printing Service,Professional Plastic 3D Printing
Suzhou FCE precision electronics Co., LTD , https://www.fukeyifcesz.com