The garbage truck is not only used to clear and transport rubbish, but its beautiful shape and intelligent design have also become the favored objects of sanitation management personnel. However, if you want to maintain the normal use of garbage trucks, you must not know anything about the cleaning and maintenance of garbage trucks. Next, let's take a look at the maintenance measures of the garbage truck.
First of all, when cleaning the garbage truck, it is necessary to reduce the temperature of the vehicle body to less than 60 degrees Celsius. The temperature around the vehicle should also be maintained at a temperature of at least 0 degrees Celsius and within 40 degrees Celsius. Cleaning the water gun must also be about 15 centimeters away from the body. The sequence of vehicle cleaning must start from the two ends of the roof and go to the sides of the vehicle one by one. The mode of spraying water for vehicle cleaning should be fog-based. Do not use too much force so as to avoid failure during cleaning of the garbage truck.
Second, on the occasion of cleaning garbage trucks, it is mainly to wash away stubborn stains left on the rubbish body. The specific removal method is to use a strong decontamination agent with a cotton cloth slowly wipe. After the wiping is completed, use a sufficient amount of clean water to rinse the cleaning agent on the vehicle body, and dry the remaining moisture on the vehicle with a dry rag. It is considered to complete the appearance of the garbage truck cleaning work.
Finally, the cleaning and maintenance of garbage trucks, in addition to the normal cleaning of stains, can also use the high-pressure water gun to clean stubborn stains remaining on the vehicle body. The specific method of high-pressure water gun cleaning garbage trucks is to gradually flush stubborn stains and sediments that are contaminated by the vehicle body from top to bottom, and then to rinse the rear of the vehicle, and finally to clean the lower part of the vehicle. However, the use of high-pressure water gun to clean the garbage truck also needs to pay attention to the vehicle chassis should be fully cleaned, thoroughly clean the edge of the vehicle and the corners of the bend. In particular, the wheels and brake discs of the garbage truck, the front grill belt, and the frame inside the car door must be thoroughly cleaned by the high pressure water gun.
Matrix Type Stock Bin,Gantry Loader Matrix Stock Bin,Gantry Robot Matrix Stock Bin,Matrix Tray For Gantry Loader
Qingdao Jiujin Machinery Co., Ltd , https://www.jiuinmachinery.com