Pre-departure check
(1) According to the specified items, the standard checks that the technical status of each part of the vehicle is in good condition. Focus on the steering system, brake system, horns, lights, etc., not allowed to carry sick work.
(2) Before driving, check the vehicle's driving license, driver's license and other necessary documents for driving, etc., and do not drive without a license.
Driving
(3) The battery car driver in the factory must strictly abide by the “Intra-plant Traffic Safety Management Standards†and the “Safety Production Code†during driving.
(4) In the factory area, workshop, freight yard, storage area and construction site, it should be driven within the prescribed safe passage. The maximum speed is 10 kilometers per hour. The speed of entry and exit of the construction site, intersections and corners is not allowed to exceed 5 kilometers per hour. The speed of entry and exit of factories, warehouses and gates must not exceed 3 kilometers per hour.
(5) The battery car should not be driven at a low speed for more than 10 seconds. The full-speed full-load continuous driving time should not exceed 1 hour. Otherwise, there should be a certain interval.
(6) The battery vehicles (including battery forklifts) in the factory shall not be close to the fire source, shall not enter the flammable and explosive areas, and shall not be allowed to ship dangerous goods.
(7) The loading of the battery vehicle is strictly prohibited. The objects contained are not allowed to exceed the car, and if they need to exceed the car, they must be balanced. Do not
Quasi-ultra-high (less than 2 meters from the ground).
(8) On the slope, the slope of the uphill slope shall not exceed 3%, and the slope of the downhill slope shall not exceed 8%.
(9) It is strictly forbidden to drive the battery forklift motor and the oil pump motor at the same time
use.
(10) When the battery car passes through the factory level crossings and intersections, it is necessary to "slow, see, and pass", and it is forbidden to force the passage.
(11) The battery car cab is not allowed to sit over. Vehicles without armrests and trunk rails are strictly prohibited from carrying people, and passengers and cargoes are not allowed to be mixed.
(12) The battery car driver is not allowed to leave the car during work. When you have to leave the car due to special circumstances, you must pull down the electric brake, remove the electric lock key, and lock the door.
Post-shipment maintenance
(13) The electrical components of the vehicle are strictly prohibited from touching metal objects, and metal objects must not be placed on the top surface of the battery.
(14) The components of the electrical system such as wires and overcurrent protection devices shall not be arbitrarily changed or replaced.
(15) The end joints, connecting wires, etc. of the battery pack shall not be in contact with the exposed parts of the wires, nor shall the wires of the battery pack be in contact with the vehicle body.
(16) The charging place of the battery must have good ventilation and fireworks are strictly prohibited.
(17) When repairing the vehicle, the power should be cut off, the reversing lever should be placed in neutral, and the hand (foot) brake should be in the braking state.
(18) When inflating the tire, first check the bolts (caps) that fasten the tire.
(1) According to the specified items, the standard checks that the technical status of each part of the vehicle is in good condition. Focus on the steering system, brake system, horns, lights, etc., not allowed to carry sick work.
(2) Before driving, check the vehicle's driving license, driver's license and other necessary documents for driving, etc., and do not drive without a license.
Driving
(3) The battery car driver in the factory must strictly abide by the “Intra-plant Traffic Safety Management Standards†and the “Safety Production Code†during driving.
(4) In the factory area, workshop, freight yard, storage area and construction site, it should be driven within the prescribed safe passage. The maximum speed is 10 kilometers per hour. The speed of entry and exit of the construction site, intersections and corners is not allowed to exceed 5 kilometers per hour. The speed of entry and exit of factories, warehouses and gates must not exceed 3 kilometers per hour.
(5) The battery car should not be driven at a low speed for more than 10 seconds. The full-speed full-load continuous driving time should not exceed 1 hour. Otherwise, there should be a certain interval.
(6) The battery vehicles (including battery forklifts) in the factory shall not be close to the fire source, shall not enter the flammable and explosive areas, and shall not be allowed to ship dangerous goods.
(7) The loading of the battery vehicle is strictly prohibited. The objects contained are not allowed to exceed the car, and if they need to exceed the car, they must be balanced. Do not
Quasi-ultra-high (less than 2 meters from the ground).
(8) On the slope, the slope of the uphill slope shall not exceed 3%, and the slope of the downhill slope shall not exceed 8%.
(9) It is strictly forbidden to drive the battery forklift motor and the oil pump motor at the same time
use.
(10) When the battery car passes through the factory level crossings and intersections, it is necessary to "slow, see, and pass", and it is forbidden to force the passage.
(11) The battery car cab is not allowed to sit over. Vehicles without armrests and trunk rails are strictly prohibited from carrying people, and passengers and cargoes are not allowed to be mixed.
(12) The battery car driver is not allowed to leave the car during work. When you have to leave the car due to special circumstances, you must pull down the electric brake, remove the electric lock key, and lock the door.
Post-shipment maintenance
(13) The electrical components of the vehicle are strictly prohibited from touching metal objects, and metal objects must not be placed on the top surface of the battery.
(14) The components of the electrical system such as wires and overcurrent protection devices shall not be arbitrarily changed or replaced.
(15) The end joints, connecting wires, etc. of the battery pack shall not be in contact with the exposed parts of the wires, nor shall the wires of the battery pack be in contact with the vehicle body.
(16) The charging place of the battery must have good ventilation and fireworks are strictly prohibited.
(17) When repairing the vehicle, the power should be cut off, the reversing lever should be placed in neutral, and the hand (foot) brake should be in the braking state.
(18) When inflating the tire, first check the bolts (caps) that fasten the tire.
Blind Spot Monitoring System,Blind Spot Monitor,Blind Spot Monitoring System,blind spot detection
Shenzhen Future Automotive Technology Co,Ltd , https://www.fuchuangauto.com