Analysis of Several Common Flow Meter Concepts and Their Working Principles

Analysis of Several Common Flow Meter Concepts and Their Working Principles

Basic knowledge and comparison of several common flowmeters; differential pressure flowmeters (DP) are the most common flow technologies, including orifice plates, venturi tubes, and sonic nozzles. DP flow meters can be used to measure the flow rates of most liquids, gases, and vapors. The DP flow meter has no moving parts and is widely used and easy to use. However, after the blockage, it will produce pressure loss, affecting the accuracy. The accuracy of the flow measurement depends on the precision of the pressure gauge. This article will simply compare some of the common flow meters and welcome additional discussion.

Differential Pressure Flowmeter (DP)

This is the most common flow technology, including orifice plates, venturi tubes, and sonic nozzles. DP flow meters can be used to measure the flow rates of most liquids, gases, and vapors. The DP flow meter has no moving parts and is widely used and easy to use. However, after the blockage, it will produce pressure loss, affecting the accuracy. The accuracy of the flow measurement depends on the precision of the pressure gauge.

Volumetric flowmeter (PD)

PD flowmeters are used to measure the volumetric flow rate of a liquid or gas. It introduces fluid into the metering space and calculates the number of revolutions. Impellers, gears, pistons, or orifices are used to divert fluid. PD flowmeters are highly accurate and are one of several methods for measuring viscous liquids. However, it also produces irrecoverable pressure errors and requires moving parts.

Turbine flowmeter

As fluid flows through the turbine flow meter, the fluid rotates the rotor. The speed of rotation of the rotor is related to the speed of the fluid. The average flow rate sensed by the rotor is used to derive the flow rate or total amount. Turbine flowmeters can accurately measure clean liquids and gases. Like PD flowmeters, turbine flowmeters also produce irrecoverable pressure errors and require moving parts.

Electromagnetic Flowmeter

When a conductive fluid flows through an electromagnetic field, the velocity of the fluid can be obtained by measuring the voltage. Electromagnetic flowmeters have no moving parts and are not affected by fluids. Measuring conductive liquids at full pipe is highly accurate. Electromagnetic flow meters can be used to measure the flow rate of a slurried fluid.

Ultrasonic flowmeter

The time-of-flight method and the Doppler effect method are commonly used ultrasonic flowmeters to measure the average velocity of a fluid. Like other speedometers, it is a meter that measures volume flow. It is an unobstructed flowmeter and does not require insertion if the ultrasonic transmitter is installed outside the pipeline. It is suitable for almost all liquids, including slurries, with high precision. However, the fouling of the pipeline can affect the accuracy.

Vortex flowmeter

Vortex flowmeters place a non-streamlined vortex generator in the fluid. The velocity of the vortex is proportional to the velocity of the fluid, and the volume flow is calculated. Vortex flowmeters are suitable for measuring liquids, gases or steam. It has no moving parts and no dirt problems. Vortex flowmeters produce noise and require fluids with higher flow rates to generate vortices.

Thermal mass flow meter

The fluid velocity is measured by measuring an increase in the temperature of the fluid or a decrease in the thermal sensor. Thermal mass flow meters have no moving parts or holes and can accurately measure gas flow. Thermal mass flow meters are one of the few technologies that can measure mass flow, and are also a few technologies that measure the flow of large-diameter gases.

Coriolis flowmeter

This type of flow meter uses a vibrating fluid tube to produce a deflection that corresponds to the mass flow to measure. Coriolis meters can be used to measure the mass flow of liquids, slurries, gases or steam. High accuracy. However, regular maintenance of the pipe wall is required to prevent corrosion.

Electromagnetic Flowmeter

Measuring principle: Faraday's law of electromagnetic induction proves that a conductor moving in a magnetic field will induce a potential. Using electromagnetic measurement principle, fluid is the conductor in motion. The induced potential is proportional to the flow rate and detected by the two measuring electrodes. The transmitter then amplifies it and calculates the flow based on the cross-sectional area of ​​the pipeline.

Food Packaging Bag

Food Packaging Bag,Shrink Wrap Bags,Sandwich Bags,Cookie Bags

Jiangmen Yingzhihui Electronic Commerce Co., LTD , https://www.jmyzhprint.com

Posted on