The principle course of the ore dressing test of the mine is shown in the figure, the original ore is crushed and broken to less than 12mm After, greater than 1mm The granules of each group are separately selected for jigging, less than 1mm Each of the fine fractions was separately shaken. The comprehensive index of re-election is: concentrate yield is 45.38% , concentrate grade (SrSo 4 ) is 86.12% , and recovery rate is 83.31% . The middle mines of the jigging and shaker can be recovered by three methods such as magnetic separation, re-election and flotation after crushing and grinding, but the index of the flotation scheme is the best. Note that in the flotation sludge and dispersion suppressing limonite ore, after using Na 2 CO 3 and Na 2 SiO 3 slurried, pH is preferably controlled at between 8 and 9.5, with oleic acid as collector When the temperature of the slurry is greater than 25°C . In addition, the structure of the flotation process has a greater impact on product quality. When the flotation feed is taken as 100% , the yield of flotation concentrate is 44.50% , and the concentrate grade (SrSO 4 ) is 86.04% . It is 95.68% .
Stereo Light Curing Molding - Sla
STEREO LIGHT CURING MOLDING - SLA
It mainly uses photosensitive resin as a raw material, and utilizes the characteristic that liquid photosensitive resin will cure quickly under ultraviolet laser beam irradiation. The photosensitive resin is generally liquid, and it immediately initiates a polymerization reaction and completes curing when irradiated with a certain wavelength of ultraviolet light (250 nm to 400 nm). SLA focuses on the surface of the light-curing material by focusing ultraviolet light of a specific wavelength and intensity to solidify it sequentially from point to line and from line to surface, thereby completing the drawing of a layered cross-section.
Sla,Sla 3D Printing Service,Sla Printing Service,Sla Rapid Prototyping
Ningbo Rongna Technology Co.,Ltd , https://www.prototyping-machining.com