With the gradual increase of buildings, many times we need to complete construction projects through high-altitude operations. Therefore, high-altitude vehicles have emerged. The high-altitude operation vehicles are controlled by a hydraulic or electric system. The work vehicle is mainly equipped with a hydraulic transmission loading device. After the construction personnel are lifted into the air, the work is carried out. In the case of correct use, the safety of the operator can be guaranteed, but if any misbehavior occurs, it is It is easy to cause potential danger.
At present, high-altitude trucks have been widely used in the fields of electric power, street lamps, and municipal operations. There are special operating devices for high-altitude trucks. At the same time, they can also remotely control the start and stop of engines and control the speed of work vehicles. The electro-hydraulic ratio allows the aerial working vehicle to rotate around 360° during operation, which not only combines the functions of night lighting, but also lifts heavy objects.
The aerial working vehicle is a multifunctional, multi-purpose working device. The bracket at the front end of the boom can not only install the lifting device, but also can install the manned platform to realize material lifting and hoisting and lifting. Manned aerial work, etc. At present, high-altitude trucks are equipped with three-dimensional rotating lifting devices, which not only can maintain the stability of lifting materials, but also can lift the material to any direction, arbitrary height, etc., the speed control is very accurate, and the machine's micro-motion The performance is also very good. This can meet the requirements for installation of aerial work and ventilation ducts in large caverns.
In order to reduce the potential danger caused by aerial vehicles, operators must hold a bus driving license when operating aerial vehicles. Be sure to pay attention to the hydraulic pump when adding the gearbox. During the passage period, attention must be paid to the height of the passage of bridges and tunnels. At the same time, the speed of the road during the passage should not exceed 30 km/h, and the speed of the suburbs should not exceed 40 km/h.
American Car Brake Pads,Rear Brake Pads For Ford Car,Lincoln Auto Brake Pads,Brake Pads For Audi
DONGYING BORUI BRAKE SYSTEM CO.,LTD. , https://www.boruiauto.com