In the near future, frequent heavy rains fell to the north of the Yangtze River, and the rainfall reached record highs. While affecting the vast majority of people traveling, they are the most worried to the majority of car owners. Travel is to facilitate life, but travel safety is more worthy of attention and care than convenience. Driving on a rainy day, the most troublesome problem for drivers is that the terrain is too low and there is a lot of water. If you need to pass, you need to wading, but the series of maintenance after wading is very troublesome, and many owners do not ask professional maintenance personnel to do it. Maintenance, but afterwards self-repair, then this situation needs to understand the specific maintenance considerations.
There are mainly the following aspects that require special attention:
First, before the wading of water, it is necessary to carry out a certain amount of dressing for the relevant parts of the electricity. After the completion of the wading, it is necessary to dismantle it immediately and dry the wetted part.
Second, to do the relevant inspection work, mainly check the gears and circuits. Check if the box where the gear is located is in the condition of water ingress. Check if there is any sediment entering. If there is a need to clean it in time, it will affect the braking effect of the vehicle. Check the circuit of the vehicle. If it is not determined that the relevant parts are not in the water state, do not start the vehicle. Otherwise, the engine will be damaged and the hardware facilities of the vehicle will be damaged.
Third, check the tires. During the wading process, the condition of the road surface below the water surface is complex. If you see the tire being scratched by a hard object under water, you must go to a professional repair shop for maintenance.
Fourth, after wading through the wading section, you can choose to gently step on the brake pedal. This helps the brake system evaporate water vapor faster. If water vapor does not evaporate completely, it will have an impact on the effect of braking and pose a certain safety threat to the vehicle.
Fifth, observe that the vehicle is out of water, then continue to maintain the engine's operation, then the driver to get off to see if the engine has water. After the inspection, turn off the vehicle and check if there is water in the engine oil. If there is water, it needs to be replaced as soon as possible.
Shock Absorber Cover,Shock Absorber Dust Cover,Shock Dust Cover,Absorber Cover
Ningbo Metal Sharing Supply Chain Management Co., Ltd , https://www.zenlesmart.com