TXJS30 large wet spray robot and TXJS20 crawler wet spray system

Robots are suitable for railroads, highways, tunnels, slopes, tunnels and culverts for water conservancy and hydropower, subways, and various civil construction projects. It can be said that the use of robots is very wide. Jiaozuo Taixin Company has taken a fancy to this and is dedicated to In researching, developing and producing manipulators for many years, not only has there been a breakthrough in quality, but also an important improvement in the manipulator's flexibility and appearance; the TXJS30 concrete shotcrete unit is a large wet spray manipulator. A few months of R&D and production, the TXJS20 track-type spray gun has also been born. This is a small wet spray robot. It can be said that the two robots have their respective advantages and each has its own characteristics. Demand for different construction sites.

TXJS30 large wet spray robot

Application area

TXJS30 concrete spraying unit, commonly known as manipulator or spraying robot, is suitable for railways, highway tunnels, slopes, water conservancy, hydroelectric tunnels and culverts, subways and various civil construction projects.

Performance characteristics

1. The foldable intelligent manipulator is suitable for long distance and large height wet spraying sites;

2. Double-layer retractable spray arm inside and outside, big arm and small arm with automatic parallel function, simple operation;

3. Intelligent jet operation, high jetting accuracy, wide jetting range, small jet blind area;

4. The quick-setting coagulant system for proportional control of electric frequency, wide range of additive ratio and small rebound;

5. Piston pumping system, injection volume 4-30m3/h, which is more than three times higher than that of rotor concrete sprayer;

6, four-wheel drive, two-way driving, four-wheel steering;

7. The imported wireless remote controller can remotely control all the spraying operations, adjust the ratio of additives at any time, and improve the working environment;

8, the compact structure of the whole machine, small turning radius, suitable for sites with limited construction space;

9, dual-powered pumping system, optional electric drive or diesel engine drive (optional).

TXJS20 Track Type Concrete Spraying Unit (Small Wet Spray Manipulator)

Application area

The TXJS20 track-type spraying unit is suitable for the shotcrete support operation environment of railways and road tunnels. It is especially suitable for small section tunnels or large cross-section tunnels with complex geological conditions and multi-step construction technology.

Technical features

1. Miniaturized design: The work area is small and the movement is flexible and convenient. It is especially suitable for multi-step construction of small section tunnels or large section tunnels;

2. The use of crawler-type walking mechanism: good site adaptability, strong climbing ability, and low requirement for the pavement of the construction site;

3. Separate design of shotcrete manipulator and pumping trolley: When it is working, the pumping trolley will be placed far away from the face of the construction hand, which is conducive to tanker transport of wet shotcrete;

4, "full remote control + local operation" dual operation mode: both operation modes can operate on all actions, and can be switched at any time, convenient and safe;

5. Simplified design of the boom structure: The structure of the boom is simplified, the number of degrees of freedom is optimized, the operation is simpler, and the user is easier to grasp;

6, "Diesel power + external" dual power mode design: The two modes can be flexibly switched to avoid the impact of power failure on the use of equipment.

TXJS30 large wet spray robot