The off-season of vehicle sales is not short, and the “Three Guarantees Law†for automobiles will soon implement the threshold for increasing the value of parts and components companies. There are many opportunities for overseas mergers and acquisitions of competitive parts and components companies. All these positives highlight the fact that domestic auto parts companies have entered a new era of prosperity. cycle. A number of fund managers interviewed by the Shanghai Daily stated that they are determined to look at the auto parts sector.
Domestic auto hot-selling components industry
Although exports of auto parts were relatively bleak in the first half of the year, the domestic market was warm and concentrated, which was primarily due to the unexpected increase in domestic vehicle sales. Statistics from the CLUCC show that since the beginning of the year, the year-on-year increase in the retail sales volume of passenger cars has always been higher than the year-on-year increase in wholesale volume, indicating that the terminal demand is strong, which is also confirmed by the lower inventory coefficient. In July, the retail sales volume of narrow passenger cars increased by 18% year-on-year, two percentage points higher than the increase in wholesale sales. July's total sales slightly exceeded expectations, while retail sales grew faster than wholesale sales, further reflecting the current strong domestic demand.
According to the latest statistics from China Association of Automobile Manufacturers, in July, the national automobile production and sales were 1,583,300 and 1,516,300, respectively, an increase of 10.2% and 9.9% respectively year-on-year. From January to July, the production and sales of automobiles were 12.335 million vehicles and 12.2986 million vehicles, respectively, an increase of 12.5% ​​and 12.0% year-on-year respectively.
Looking to the future, some analysts pointed out that residents in third and fourth-tier cities are currently very enthusiastic about car purchases, and car consumption has become a “just-neededâ€, so there is more room for cars to look after.
The exceeding sales of vehicle sales will support the performance of listed auto parts companies. A public fund manager reported to the Securities and Exchange Commission that due to the lagging nature of the parts and components market, auto sales in 2013 will extend to parts and components listed companies. The future growth rate of parts and components listed companies will be relatively clear, and industry capacity will expand to create room for growth. .
In addition, according to the investment manager's report to the Securities and Exchange Commission, at present, the prices of raw materials for auto parts, such as rubber and steel, will continue to decline, which will reduce the company’s cost pressure and increase profits, and will also constitute new components for auto parts companies. Good.
"Three Guarantees" Improves the Threshold of Parts and Components Enterprises
The "Three Guarantees Law" for cars that has been planned for seven years will be officially implemented on October 1 this year. This will help parts and components listed companies to obtain orders and maintain gross margins, and achieve strong and consistent.
After studying the “Three Guarantees Lawâ€, it can be seen that the three packs of components include the two major engine and transmission assemblies, steering systems, brake systems, suspension systems, bodywork, front/rear axles, and 13 fragile parts. . The above-mentioned laws and regulations have made clear and inflexible provisions for parts and components in these areas. Obviously, strict regulations on parts and components must have a profound effect on the industry. Even some companies shouted the fear that the wolf really came. Of course, this is only for those who take advantage of counterfeiting to gain market interest. Good for quality companies.
The "Three Guarantees Law" clearly stipulates the quality of auto parts. Parts used for the repair of home auto products should be qualified parts provided or approved by the manufacturer, and the quality should not be lower than that of a production line for a domestic auto product. . This will be a big challenge for companies whose technical level and quality control capabilities are relatively different from the original ones. Therefore, if you want to obtain a market, you must comply with the relevant standards. This will inevitably enable related companies to improve their internal management, product technology, and quality. Some companies that are incapable or mainly fake and shoddy will be eliminated and returned to the industry. It is a healthy and orderly market.
Overseas mergers and acquisitions help Chinese companies overtake the curve
The acquisition of European engine technology from Boyion Investment, the cooperation between Zhongding Group and foreign investment in the construction of super-environmental engines, and the acquisition of European and American parts giants in Ningbo Huaxiang, the domestic parts and components companies launched a wave of ambitious expansion and expansion. upgrade.
China's parts and components industry is still quite fragmented. How to get rid of homogenous competition, achieve higher quality production, and move toward the top of the value chain is the key to achieving healthy growth in the industry. M&A, including the acquisition of overseas assets, is also one of the shortest ways for the industry to achieve transformation and upgrading in the future.
In the investigation, the reporter learned that many Chinese companies eagerly looking for technologies such as engines, brakes, and transmissions are hiring investment banks, management consultants and law firms, and are studying possible mergers and acquisitions.
M&A combat expert and senior investment banker Wang Shijun said recently that due to the economic crisis that occurred in 2008, it was caused by the release of the dividends of the second industrial revolution in the West. Therefore, there is no longer any periodicity. “We cannot see it now. Where is the end of the European crisis?†This has given the global mergers and acquisitions a great deal of business opportunities and formed an underestimation of assets. “In this context, the loss of the advantages of some companies in the Western market does not mean that their advantages are lost.†While China has a huge market, there are also cost spaces that can be reduced, so global mergers and acquisitions, markets huge.
In addition, due to the bankruptcy of some parts companies in Europe and the United States, part of the market share was withdrawn, and China's spare parts company will fill the vacant market share. Through mergers and acquisitions, these parts and components companies will undoubtedly obtain "admission tickets" for these higher-margin markets.
Another high-level domestic parts manufacturers believe that even if the slow recovery in Europe and the United States, domestic enterprises can still develop and seize the Southeast Asian and Indian markets, especially the Indian market is very broad, enough Chinese parts and components companies to "share" more than a decade.
EVA marine diamond sheet is a new development from the EVA Faux Teak Sheet, showing a new special look from the straight grooves surface finished. Durable and shock absorbent, it provides not only an exceptional traction surface but also lessens the fatigue brought on by prolonged standing and working on hard decking and platforms.
Made from marine grade UV resistant, closed cell, high density EVA foam material, it stands perfectly even in a strong sunlight area. And the EVA foam material makes it softer and more comfortable for people standing there bare feet than real wood or synthetic flooring. Some would concerned if the boat mat would be not durable to use since it is made from foam material. Well, it may not hard like real wood or PVC flooring, and compete the durability with those two, but with a higher density EVA foam, we are able to compete with other suppliers who try to compromise the density to reach to a lower price.
The sheet comes in 190cm x 70cm, user can cut the sheets into size to fit the shape of boat decking, then just peel and stick since the sheets we offer is with 3M adhesive on the backing. It can be applied on boat decking of course, and other like swim platform pad, helm station pad or simple seat pad.
Eva Marine Diamond Sheet,Marine Diamond Sheet,Eva Boat Sheet,Adhesive Marine Diamond Sheet,Eva Diamond Sheet,Platforms Marine Diamond Sheet
Huizhou City Melors Plastic Products Co., Limited , https://www.evadecking.com