Single projection X-ray machine for inspection of baggage and hand luggage
General Specifications
| Tunnel Size : | 500 (W) ×300 (H) mm |
| Conveyor Speed: | 0.22m/s |
| Conveyor Max Load: | 150 kg |
| Single inspection dosage: | <1.01μG |
| Film Safety: | Guarantee ISO1600 Film |
| Leakage radiation: | <0.1µGy/h |
| Steel Penetration: | 40mm |
| Spatial Resolution: | 1.0mm Horizontal and Vertical |
| Wire Resolution: | 40AWG |
| Power Requirement: | 220V AC (±10%) 50±3Hz |
X-RAY GENERATOR
| Orientation: | Upward |
| Tube Current: | 0.4-1.25mA(adjustable) |
| Anode Voltage: | 80-160KV(adjustable) |
| Angle: | 80° |
| Generator cooling/working periods: | Sealed oil bath with forced air/100% |
OPERATING ENVIRONMENT
| Storage Temperature: | -20oC to 60oC |
| Operating Temperature: | 0oC to 45oC |
| Relative Humidity: | 20 to 95% non-condensing |
| System Power: | 220 VAC (±10%) 50±3HZ |
| Power wastage: | 1.0 KW (Max) |
| Noise: | <55DB |
Computer Specification:
| Processor: | I3-4340 (Dual core four thread) 3.6 GHZ 22nm 54W |
| Memory: | 4GDDR3 Loptop Memory |
| Hard Disk : | 1T |
Image Display:
| Display: | 19'' High Resolution LCD Monitor |
| Display Resolution: | 1280*1024;24 bit/pixel Color |
| Contrast Sensitivity: | 24 Visible Levels, 4096 Gray Level |
| Image storage: | 100,000 pictures in real time (can be customized) |
| Zoom: | 64 Times Enlarge, Whole screen continuous observation |
Detail Photo :
Single projection X-ray machine for inspection of baggage and hand luggage
General Specifications
| Tunnel Size : | 500 (W) ×300 (H) mm |
| Conveyor Speed: | 0.22m/s |
| Conveyor Max Load: | 150 kg |
| Single inspection dosage: | <1.01μG |
| Film Safety: | Guarantee ISO1600 Film |
| Leakage radiation: | <0.1µGy/h |
| Steel Penetration: | 40mm |
| Spatial Resolution: | 1.0mm Horizontal and Vertical |
| Wire Resolution: | 40AWG |
| Power Requirement: | 220V AC (±10%) 50±3Hz |
X-RAY GENERATOR
| Orientation: | Upward |
| Tube Current: | 0.4-1.25mA(adjustable) |
| Anode Voltage: | 80-160KV(adjustable) |
| Angle: | 80° |
| Generator cooling/working periods: | Sealed oil bath with forced air/100% |
OPERATING ENVIRONMENT
| Storage Temperature: | -20oC to 60oC |
| Operating Temperature: | 0oC to 45oC |
| Relative Humidity: | 20 to 95% non-condensing |
| System Power: | 220 VAC (±10%) 50±3HZ |
| Power wastage: | 1.0 KW (Max) |
| Noise: | <55DB |
Computer Specification:
| Processor: | I3-4340 (Dual core four thread) 3.6 GHZ 22nm 54W |
| Memory: | 4GDDR3 Loptop Memory |
| Hard Disk : | 1T |
Image Display:
| Display: | 19'' High Resolution LCD Monitor |
| Display Resolution: | 1280*1024;24 bit/pixel Color |
| Contrast Sensitivity: | 24 Visible Levels, 4096 Gray Level |
| Image storage: | 100,000 pictures in real time (can be customized) |
| Zoom: | 64 Times Enlarge, Whole screen continuous observation |
Detail Photo :
Precautions for daily maintenance of hydraulic cylinders
1. Regularly inspect the sealing components of the hydraulic cylinder, such as O-rings and gaskets, to ensure that they are intact and undamaged. If there is wear or aging, they should be replaced in a timely manner.
2. Regularly check the liquid level of the hydraulic cylinder and keep it within the specified range. If the liquid level is too low, add hydraulic oil in a timely manner.
3. Regularly inspect the connection parts of the hydraulic cylinder, such as oil pipes and joints, to ensure their tightness and reliability. If there is any looseness, it should be tightened in a timely manner.
4. Regularly clean the outer surface of the hydraulic cylinder to prevent dust, sand, and other debris from entering the interior of the cylinder and affecting its normal operation.
5. Regularly inspect the surface of the piston rod of the hydraulic cylinder, and promptly repair or replace it if there are scratches or wear.
6. Regularly inspect the hydraulic system of the hydraulic cylinder, and promptly handle any problems such as oil leakage or unstable pressure.
7. When the hydraulic cylinder is not in use for a long time, its hydraulic oil should be drained to avoid oil aging, deterioration, and affecting the normal operation of the hydraulic system.
8. When repairing or replacing hydraulic cylinders, attention should be paid to safety to avoid sudden movement or pressure release of the hydraulic cylinder, which may cause personal injury or equipment damage.
For Liugong Cylinder Seal Kit,For Liugong Swing Motor Seal Kit,Center Joint Seal Kit For Liugong,Center Joint Seal Kit Liugong
Safe Seal Technology Co., Ltd. , https://www.sprsealkits.com