Security Hand Held Metal Detector for Body Scanning

GP-3003b1 Hand Held Metal Detector


Brief introduction
The MD-3003b1 is a high performance hand held metal detector designed to meet the exact requirements of the security industry. Typical uses will include body search for offensive weapons in crowd control, airport and border security, checking parcels and letters for metal objects and anywhere that hidden metal needs to be detected.
 
Technical Specifications
Power Voltage: 9V(6F22) standard or rechargeable battery
Power :      270mW
Operate Frequency: 22KHz
Operate Current: < 50mA
Operating Voltage: 7V-9V
Operating temperature: -50°C to +55 °C
Net Weight :    409g
Dimension :    41(L) X 8.5(W) X 4.5(H)cm
Indicator: Visual: Red / Green LED
Detecting way : Speaker or Earphone;(Earphone not included) , vibration
Control: On/Off Switch; Low sensitivity Switch Sensitivity Adjuster
Performance: The sensitivity of the detector is determined primarily by the size, shape and composition of the object to be detected.
Maximum detection range:
Object                        low sensitivity           optimum sensitivity
38 caliber hand gun         15cm                        20cm
pen knife                      10cm                        15cm
Razor blade                    5cm                       10cm
Export Packing: 25 Pieces Per Carton 0.089CBM N.W 10.3KG ;G.W 16.5KG


GP-3003b1 Hand Held Metal Detector


Brief introduction
The MD-3003b1 is a high performance hand held metal detector designed to meet the exact requirements of the security industry. Typical uses will include body search for offensive weapons in crowd control, airport and border security, checking parcels and letters for metal objects and anywhere that hidden metal needs to be detected.
 
Technical Specifications
Power Voltage: 9V(6F22) standard or rechargeable battery
Power :      270mW
Operate Frequency: 22KHz
Operate Current: < 50mA
Operating Voltage: 7V-9V
Operating temperature: -50°C to +55 °C
Net Weight :    409g
Dimension :    41(L) X 8.5(W) X 4.5(H)cm
Indicator: Visual: Red / Green LED
Detecting way : Speaker or Earphone;(Earphone not included) , vibration
Control: On/Off Switch; Low sensitivity Switch Sensitivity Adjuster
Performance: The sensitivity of the detector is determined primarily by the size, shape and composition of the object to be detected.
Maximum detection range:
Object                        low sensitivity           optimum sensitivity
38 caliber hand gun         15cm                        20cm
pen knife                      10cm                        15cm
Razor blade                    5cm                       10cm
Export Packing: 25 Pieces Per Carton 0.089CBM N.W 10.3KG ;G.W 16.5KG

Excavator cylinder oil seals

â‘ Hardness:

Due to the scientific synthesis of high-molecular polyurethane elastomer materials using iron rubber, the higher the hardness, the higher the modulus, the smaller the elongation, and the better the wear resistance and heat resistance. Well, in the range of minus 35 degrees Celsius to 100 degrees Celsius, and at a pressure of 60 to 70 MPa, the maximum sealing performance can be guaranteed.

â‘¡Pressure resistance:

The use of viscoelastic seals made of nitrile rubber is the most complete protection against damage caused by back pressure. In the range of minus 55 degrees Celsius to 100 degrees Celsius, and under a pressure of 21MPa, due to the rubber The seal is often in a compressed state, so the compression performance of the rubber seal must be considered. It not only achieves enhanced anti-climbing performance and low friction resistance, but also has good performance in dealing with special low-temperature oil, and can also be used in combination with Anti-wear Ring double-purpose retaining ring BRL type.

â‘¢Prevention of oil leakage:

Sealing products made of polytetrafluoroethylene and nitrile rubber/PTFErubber; or seals made of nylon resin and nitrile rubber, which can be used in a wide range of applications with large pressure changes and fast sliding speeds According to the working condition, the input hydraulic pressure cutout is designed on the end face of the polytetrafluoroethylene ring to prevent penetration leakage. The maximum working temperature environment is minus 40 degrees Celsius to 160 degrees Celsius; the maximum working pressure is 50MPa.

SPGW piston seal

Material:PTFE+rubber elastomer+reinforced modified nylon
Temperature:Nitrile rubber -40~100℃
Speed:=1.0m/s
Pressure:≤50mpa

SPGO piston seal

Material:PTFE+rubber elastomer
Temperature:Nitrile rubber -40~110℃
Speed:=1.0m/s
Pressure:≤35mpa

SRUV piston rod seal

Material:NBR+thermoplastic polyurethane
Temperature: -35`90℃
Speed:=0.5m/s
Pressure:≤40mpa

SRS piston rod seal

Material:PTFE+NBR
Temperature:-40~110℃
Speed:=1.0m/s
Pressure:≤40mpa

SRCB piston rod buffer seal

Material:Polyurethane+modified polyoxymethylene
Temperature: -35~110℃
Speed:=1.0m/s
Pressure:≤50mpa

SRU piston rod seal

Material:Polyurethane
Temperature:-35~100℃
Speed:=1.0m/s
Pressure:≤40mpa

SRD iron case dust prevention

Material:Polyurethane+metal skeleton material
Temperature:-40~110℃
Speed:=1.0m/s

SRDI soft dustproof

Material:polyurethane
Temperature:-40~110℃
Speed:=1.0m/

SDS Dumbbell Seal

Material:polyurethane
Temperature: -35~110℃
Speed:=0.5m/s
Pressure:≤50mpa

SPG piston combination seal

Temperature:

NBR+Polyurethane + Modified Polyoxymethylene

Temperature:-35`110℃

Speed:=0.3m/s

Pressure:≤70mpa

SRNL piston rod seal

Material

NBR+Polyurethane + Modified Polyoxymethylene

Temperature:-35`110℃

Speed:=0.3m/s

Pressure:≤70mpa

SRDF Piston Rod Seal

Material

Polyester rubber

Temperature:-40`100℃

Speed:=1.0m/s

SDY Y-seal

Material:Polyurethane

Temperature:-35~110℃

Speed:=0.5m/s

Pressure:≤70mpa

KZT anti fouling ring

SDS Steffel

Piston main oil seal

oil seals,hydraulic oil seal,track link oil seal,TCV oil seal,O-ring

Safe Seal Technology Co., Ltd. , https://www.jsspreals.com