Rebar Bending Testing Machine (RBT165A) Three Point Bending Test

Rebar Bending Testing Machine (RBT165A) three point bending test

    This type of testing machine is designed to perform bend test on metallic materials, like rod steel, plate steel and threaded steel. It features dual-direction hydraulic loading, easy to bend specimen with diameter less than 40mm to 180° . Hand wheel drives dual-direction screw lead to adjust the support roller span. The support roller is self-lock; No need any spanner to tighten. Plug-in type mandrel is simple to change.

    This equipment provides speed adjustment function, and displacement and speed display function, fully complying with Clause 6.3 of ISO 7438: 2005: "In case of dispute, a testing rate of (1 ± 0, 2) mm/s shall be used". It can also real-time display bending angle and facilitate for various angle tests.

Features:
1. This machine is horizontal structure with height of 900mm, easy to operate
2. Two support rollers and mandrel can firstly bend the specimen to 180° , then main cylinder returns. Vice cylinder and two compression plates can further bend the specimen and guarantee 180° Bend test, fully satisfying standard requirements.
3. Displacement transducer can measure the displacement and speed and transfer the data to microcomputer, display on LCD screen after calculation. LCD screen can display test speed, piston displacement and bend angle.
4. Manual value to control cylinder action, easy to operate and high efficiency
5. Hydraulic loading, motor driving and compact construction with low noise, high reliable performance and is easy to operate.
6. Equipped with protection shields to protect users against injury caused by specimens
7. Equipped with manual hand wheel to adjust clearance between support roller to accommodate specimens of varying diameters and shapes, also with changeable mandrels.

Standards:
GB/T 232, ISO 7438

Parameters:
  Rebar Bending Testing Machine (RBT165A) three point bending test

    This type of testing machine is designed to perform bend test on metallic materials, like rod steel, plate steel and threaded steel. It features dual-direction hydraulic loading, easy to bend specimen with diameter less than 40mm to 180° . Hand wheel drives dual-direction screw lead to adjust the support roller span. The support roller is self-lock; No need any spanner to tighten. Plug-in type mandrel is simple to change.

    This equipment provides speed adjustment function, and displacement and speed display function, fully complying with Clause 6.3 of ISO 7438: 2005: "In case of dispute, a testing rate of (1 ± 0, 2) mm/s shall be used". It can also real-time display bending angle and facilitate for various angle tests.

Features:
1. This machine is horizontal structure with height of 900mm, easy to operate
2. Two support rollers and mandrel can firstly bend the specimen to 180° , then main cylinder returns. Vice cylinder and two compression plates can further bend the specimen and guarantee 180° Bend test, fully satisfying standard requirements.
3. Displacement transducer can measure the displacement and speed and transfer the data to microcomputer, display on LCD screen after calculation. LCD screen can display test speed, piston displacement and bend angle.
4. Manual value to control cylinder action, easy to operate and high efficiency
5. Hydraulic loading, motor driving and compact construction with low noise, high reliable performance and is easy to operate.
6. Equipped with protection shields to protect users against injury caused by specimens
7. Equipped with manual hand wheel to adjust clearance between support roller to accommodate specimens of varying diameters and shapes, also with changeable mandrels.

Standards:
GB/T 232, ISO 7438

Parameters:
 

Hydraulic Water Well Drilling Rig

Hydraulic water well drilling rig

Hydraulic water well drilling rig,water well drilling rig

SHANDONG YAHE CONSTRUCTION MACHINERY CO., LTD , https://www.pilingdriver.com