Fire manganese ore beneficiation process Enrichment: Fire manganese ore enrichment process is high phosphorus, high iron ores refractory poor one selected division method is generally called manganese-rich slag. The essence is a high-temperature sorting method for selectively separating manganese, phosphorus and iron by controlling the temperature of manganese, phosphorus and iron in different temperatures in a blast furnace or an electric furnace.
China has been using fire law for nearly 40 years. In 1959, Hunan Shaoyang Zijiang Iron Works was tested on a 9.4m3 small blast furnace and obtained preliminary results. Then, in 1962, Shanghai Shijingshan ferroalloy plant and blast furnace steel mills are in a manganese-rich slag. In 1975, Hunan Agateshan manganese ore blast furnace not only produced manganese-rich slag, but also recovered lead , silver and pig iron (commonly known as semi-steel) at the bottom of the furnace, providing a basis for comprehensive utilization. After entering the 1980s, the production of manganese-rich slag has developed rapidly. The production of manganese-rich slag has been developed in Hunan, Hubei, Guangdong, Guangxi, Jiangxi, Liaoning, and Jilin.
The enrichment process of the fire method is simple, the production is stable, and the iron and phosphorus in the ore can be effectively separated to obtain manganese-rich, low-iron, low-phosphorus manganese-rich slag, and the manganese-rich slag generally contains Mn 35% to 45%. Mn/Fe?12～38, P/Mn<0.002, is a high-quality manganese-based alloy raw material, and it is also an artificial rich ore that is difficult to achieve the above three indexes at the same time. Therefore, the enrichment of fire method is a promising method for mineral processing in China for high-phosphorus high-iron and low-manganese refractory ore.
- Type: TYPE1(Plate Flanges); TYPE2(Loose Plate Flanges); TYPE5(Blank Flanges); TYPE11(Weld-neck Flanges); TYPE12(Hubbed Slip-on Flanges For Welding); TYPE13(Hubbed Threaded Flanges)
- Material: Carbon steel: A105,SS400,SF440 RST37.2,S235JRG2,P250GH,C22.8, Stainless Steel: F304 F304L F316 F316L 316Ti, Copper etc.
- Standard: EN1092-1:2001
- Size: 1/2" NB TO 48"NB
- Pressure: PN6,PN10,PN16,PN25,PN40,PN64,PN100,PN160
- Packing: No Fumigate or Fumigate Plywood/Wood Pallet or Case
- Surface Treatment: Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint,Zinc,Hot dipped Galvanized.
- E-catalogue: Available , please visit catalogue of flange
- Usage: Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects etc.
Type 13 Flange,Carbon Steel Flanges,Type 13 Pipe Flange,En1092-1 Type 13 Flange
Hebei Welkin Pipe Fitting Manufacturing Co., Ltd , https://www.welkinpipeline.com