Manganese Mineral Process Flotation Machine for Nickle Ore

1.Brief Introduction 
Manganese mineral process  flotation machine for Nickle ore  suitable for separation of non-ferrous metals, ferrous metals, precious metals,non-metallic mineral and chemical raw materials, recovering use fulminates.This machine has the features of the big suction capacity and low power consumption.Every slot has the triple function of suction, grout and flotation which become the complete flotation circuit without any auxiliary equipment installing the machine in a actinic line it will be easier for the flow process change, the rational slurry cycle and furthest reducing the coarse 





2.Technical Data of Manganese mineral process  flotation machine for Nickle ore 
 

3.Working Principle Of Manganese mineral process  flotation machine for Nickle ore 

 Flotation machine consists of flotation cells, impeller, belt pulley, inlet pipe, strobe, covering plate, standpipe, draw bar, etc.
 
When the floatation machine works, the motor drives the impeller to revolve, so the centrifugal effect and negative pressure are produced. On one hand, ample air is absorbed and mixed with mineral slurry, on the other hand, the mixed mineral slurry is mingled with additive, meanwhile, the foams are thinning, the mineral is bounded with foams, and floats up to the surface of mineral slurry and the mineralized foam is formed. The liquid surface can be adjusted with the height of adjustment flashboard, so that the useful foams are scraped with squeegee.







 
4.Main Features of Manganese mineral process  flotation machine for Nickle ore 
1. large air-absorption capacity
 
2. low energy consumption
 
3. less reagents consumption
 
4. easy to maintenance and can be designed according to the users.
 
5. Every cell owns three functions: air absorption, slurry absorption, and flotation separation, and the cells form a flotation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow.
 
6. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurry respectively.
 

5.Detailed Images of CE ISO approved laboratory flotation machine/laboratory flotation cell



6.working and Delivery



7.Our Company
Gongyi Hengchang Metallurgy Building Material Equipments plant is a professional manufacturer specializing in the production of mineral beneficiation equipments, sand and stone crushing equipments, briquetting equipments, coal preparation equipments, drying and calcining equipments, cement plant equipments and compound fertilizer equipments. The products are widely used in mineral processing, metallurgy, building materials, chemicals, electricity, petroleum, coal, transportation, fertilizer , gas industry etc. 

Tube Sheet

Tube sheet are usually made of a round flat plate with holes drilled into the plate to accommodate tubes in the exact location and pattern relative to each other. The tube sheet is used to support and isolate the tubes in the Shell And Tube Heat Exchanger.

A tube sheet is a plate used to support a tube in a shell and tube heat exchanger. The tubes are aligned in a parallel manner and are supported and held in place by the tube plate. A tube sheet is a round plate with holes in it so that the tube can fit through the opening. Tubes are usually made of round, flat metal sheets. Drill holes for pipe ends in precise locations and patterns relative to each other. The tube plate is made of the same range of materials as the pipe.

These are usually made of mild steel and vary in thickness according to fluid pressure. Depending on the final application (petrochemical, nuclear, oil and gas, etc.), the tubes can be clad in stainless steel or other superalloys, or even made entirely of stainless steel or superalloys.

Tube Sheet,Boiler Tube Sheet,Floating Tubesheet,Exchanger Tube Sheet

Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com