The 61st International Turbine Technology Conference (ASME 2016 TURBO EXPO), hosted by the American Society of Mechanical Engineers (ASME) International Gas Turbine Institute (IGTI), was held in Seoul, South Korea. Professor Zheng Qun from Harbin Engineering University won the ASME IGTI Outstanding Contribution Award. The best paper award was won by the academic papers of Academician Wen Xueyou, Professor Li Shuying and Zhao Ningbo from Harbin Engineering University. It is the only individual who won the award at the top international conference. The conference papers indicate that the research level of the school gas turbine field has been unanimously recognized by international counterparts.
     The conference is the most comprehensive and top-notch industry event in the international gas turbine field with the longest history, the largest scale, the most extensive academic influence, and the integration of academic conferences and industrial exhibitions. It has 49 technical committees, each year from the United States, the United Kingdom, Germany, More than 3,000 people from dozens of countries and regions such as Italy, Japan, France, Switzerland and China attended the conference, which included almost all the top researchers and industrialists in the field. The number of papers read exceeded 1,100, and exhibitors reached 50. Yu Jia provides a good opportunity for the participants to conduct academic exchanges and cooperation and gain a deep understanding of the latest developments in the industrial field.
     During the 2016 conference, the ASME IGTI Organizing Committee recognized the researchers and 33 best academic papers that made outstanding contributions in the field of international gas turbines in 2015. Professor Zheng Qun and Professor Li Shuying from Harbin Engineering University led 8 teachers and 4 doctoral students to participate in the conference and read 10 academic papers. Among them, ASME IGTI awarded its Outstanding Service Award for its outstanding contribution during the period of the Industrial Gas Turbine and the Industrial & Cogeneration Committee. In addition, the paper “An Evaluation of the Application of Nanofluids in Intercooled Cycle Marine Gas Turbine Intercoolerâ€, which was completed by Zhao Ningbo Lecturer, Academician Wen Xueyou and Professor Li Shuying, won the ASME IGTI Best Paper Award. It is reported that this is the only ASME IGTI award that China won at the ASME 2016 TURBO EXPO conference, reflecting that Harbin Engineering University's research work in the gas turbine field has been recognized by international colleagues and is also achieved by Harbin Engineering University in promoting international exchanges and cooperation. Another important development.
     Zheng Qun, professor, doctoral tutor. Mainly engaged in advanced concept turbine theory and experimental research, variable geometry power turbine aerodynamic performance research, radial flow impeller mechanical performance research, steam turbine and gas turbine new technology research, wet compression technology research. He is currently a member of the American Society of Mechanical Engineers (ASME), a member of the ASME IGTI Industrial & Cogeneration Committee, a member of the Chinese Society of Mechanics, and a member of the China Shipbuilding Society. He has won 3 second prizes and 4 third prizes for ministerial level scientific and technological progress. In "ASME Trans. Journal of Turbomachinery, Journal of Engineering for Gas Turbines and Power, AIAA Journal of Propulsion and Power, Journal of Engineering Thermophysics, Journal of Aeronautics, Journal of Mechanical Engineering, Journal of Aerodynamics, More than 100 SCI and EI papers were published in academic journals such as China Shipbuilding, Thermal Science and Technology, and ASME TURBO EXPO. It has won the 2011 and 2012 ASME IGTI "Best Paper Award", 2013 and 2015 ASME IGTI "Outstanding Service Award".
     Wen snow Friends academician, male, born in 1940, Zhejiang Cixi people, in 1962, graduated from Shanghai Jiaotong University, in December 2005 was elected to the Chinese Academy of Engineering. Academician Wen Xueyou is a well-known expert in China's ship gas turbines. He has been active in the first line of development work for more than 40 years. He witnessed the whole process of the development of China's ship gas turbines, and has gone through many large projects from design to application. Recycling, and vigorously promote the application of innovative technology to the civil engineering field of gas turbines. Its first aviation turbojet engine (product library supply and supply), the chief designer of China, was awarded the National Science Conference Award for the high-powered marine gas turbine. ; served as director of aviation turbofan engine designer of China's first ship has changed to the second generation of gas turbine performance, its low-pressure compressor national Science and Technology progress award, China shipbuilding (stock) industrial Corporation first prize; He served as project leader to develop gas turbine back to steam injection of new technology by the China shipbuilding industry Corporation, the second prize; reinjection steam turbine cogeneration system by the China shipbuilding industry Corporation scientific and technological progress award. Wenshi attaches great importance to the application of scientific and technological achievements. The new technology of gas turbine re-injection steam research has achieved success in the first application of domestic gas turbine power plants after the success of the laboratory, reaching the international advanced level in the late 1980s and achieving remarkable economics. and social benefits, to fill the technology gap in the country. He was once rated as an expert with outstanding contributions from China National Shipbuilding Corporation and won the Silver Prize of the 2nd China Military Transnational Outstanding Entrepreneur.
     Li Shuying, female, born on October 2, 1963, doctor of engineering, professor, doctoral tutor. From February 2002 to January 2003, he collaborated with the Hong Kong Polytechnic University; in May 2004, he graduated from Harbin Institute of Technology. Mainly engaged in the simulation and experimental technology research on the overall performance and control strategy of gas turbine power plant; the simulation, fault diagnosis and experimental technology research of gas turbine overall performance and performance improvement technology; simulation and experimental research on the characteristics of closed helium gas turbine compressor. In the field of advanced recycling technology has assumed a "gas turbine power plant equipment HIL Simulation", "Technology of Gas Turbines and Double (steam re-injection)", "wet compression gas turbine technology research" and other defense base while researching the Navy and the National Natural Science Fund Project. A large number of experimental research work has been carried out on the gas turbine test bench, the compressor test bench and the small gas turbine combined power plant test bench (gas turbine, steam turbine, waste heat boiler (purchasing supply)). In the country, the first theoretical and experimental research work on steam reinjection technology, inter-stage water-jet wet compression technology, closed-type helium gas turbine characteristics and the dynamic characteristics of the switching process of the combined power plant mainframe (purchasing supply) was published. The rest, many articles were retrieved by EI. The research results won the second prize of national scientific and technological progress, the first prize of scientific and technological progress of the National Defense Science and Technology Commission, the second prize of scientific and technological progress of the Shipbuilding Corporation, and the third prize of the scientific and technological progress of the Shipbuilding Corporation. The Science and Technology Commission has won three third prizes for scientific and technological progress. He is a member of the British Marine Engineering Association.
     Zhao Ningbo, Ph.D., graduated from Harbin Engineering University in March 2016 with a degree in Power Engineering and Engineering Thermophysics. He studied under Academician Wen Xueyou and stayed at the School of Power and Energy Engineering in the same year. His main research direction is the transport of nano-functional fluids. Theory, detonation combustion propulsion technology, gas turbine thermal performance optimization and health management. In recent years, he has participated in many scientific research tasks as a key member, and won the 2015 PhD National Scholarship in International Journal of Heat and Mass Transfer, International Communications in Heat and Mass Transfer, Powder Technology, and Journal of Engineering for Gas Turbines and Power and other well-known academic journals at home and abroad have published more than 20 high-level SCI and EI papers. Currently, they are members of the American Society of Mechanical Engineers (ASME), and serve as Energy, Journal of Heat Transfer, and Powder Technology. More than ten international SCI academic journal reviewers such as the Journal of the Taiwan Institute of Chemical Engineers won the 2015 ASME IGTI “Best Paper Awardâ€.
Strength training pull band latex loops are a great way to add resistance to any workout. They are lightweight, portable, and can be used for a variety of exercises. These bands can be used for stretching, strength training, rehabilitation, and general fitness. They come in a variety of thicknesses, lengths, and colors, and can be used for a variety of exercises. Pull band latex loops are a great way to add resistance to any workout, and can be used to target specific muscle groups or to increase overall strength.
QUALITY ASSURANCE - All latex resistance bands are made of 100% natural Malaysian latex, which is the highest quality raw material for gym exercise bands. Manufactured with our patented layered technology, our bands are more durable and longer lasting than other fitness bands.
A latex tension band is a type of exercise band made of latex rubber that is used for resistance training and rehabilitation exercises. The band is usually used to provide resistance against the muscles and joints during exercises, such as stretching, strengthening, and balance drills. It is commonly used in physical therapy and rehabilitation programs to help improve muscle strength, flexibility, and range of motion. The tension band can also be used for exercises that target specific muscle groups, such as the glutes, hamstrings, and core muscles. The tension band is also a great tool for adding variety to a workout routine, as it can be used to perform a wide range of exercises.
Indoor Fitness Equipment,Exercise Resistance Band,Elastic Resistance Bands,Resistance Band
Changzhou Golden Oak Rubber Plastic Polymer Co.,Ltd , https://www.jnspullrope.com