Do you work with steel in your manufacturing facility? If so, you know all about watching your expensive steel scrap, processing fluids and facility floor space disappear.
Whether it's turnings, chips, filings, shavings or sludge, a steel briquetting machine from ShengBo is the solution. Steel briquetting can double the value you get, cause steel briquettes are easier to manage, transport, sell and recycle.
We recommend you a fully-automatic steel briquetting line, with conveyor, bunker, elevator, etc. Our Y83W Horizontal Briquette Machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
Â
| model | Y83W-2500 |
| nominal force | 2500kn |
| briquette diameter | D90Â |
| briquette density | ≥ 5t/m³ |
| briquette weight | 2~3kg |
| productivity | 3~4block/min |
| output in one shift | 3~4t/8h |
| total power | 22kw |
| machine weight | about 4.5ton |
| overall dimension | host machine: 3800*690*2000mm oil tank: 1350*1300*1160mm |
Â
Â
Â
Do you work with steel in your manufacturing facility? If so, you know all about watching your expensive steel scrap, processing fluids and facility floor space disappear.
Whether it's turnings, chips, filings, shavings or sludge, a steel briquetting machine from ShengBo is the solution. Steel briquetting can double the value you get, cause steel briquettes are easier to manage, transport, sell and recycle.
We recommend you a fully-automatic steel briquetting line, with conveyor, bunker, elevator, etc. Our Y83W horizontal Briquette Machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
Â
| model | Y83W-2500 |
| nominal force | 2500kn |
| briquette diameter | D90Â |
| briquette density | ≥ 5t/m³ |
| briquette weight | 2~3kg |
| productivity | 3~4block/min |
| output in one shift | 3~4t/8h |
| total power | 22kw |
| machine weight | about 4.5ton |
| overall dimension | host machine: 3800*690*2000mm oil tank: 1350*1300*1160mm |
Â
Â
Â
Hydraulic metal machine is mainly applicable to steel mills, recycling and processing industries and non-ferrous metal smelting industries. Hydraulic Baling Machine can squeeze all kinds of metal scrap (steel shaving, waste steel, waste aluminum, waste copper, waste stainless steel and scrap automobile waste, etc.) into cuboid, octagon, cylinder and other shapes of qualified charge, which can reduce the transportation and smelting cost, and improve the speed of furnace. It is mainly used for cold pressing under normal conditions for scrap metal scraps, scrap steel scraps, waste oil tank, disassembling car shell and other metal scraps with a thickness of less than 3mm. Cold pressed into blocks for easy storage and transportation or furnace.
Features:
1) Hydraulic drive, smooth and noiseless work, fast extrusion speed, large extrusion force, compact package block, not easy to be scattered.
2) high quality national standard steel plate with advanced welding technology to make the mechanical parts strong and durable, low failure rate, long service life.
3) the oil cylinder seal is imported glyd ring, good sealing performance, strong pressure resistance.
4) Convenient installation, small floor space, no foundation, foot, etc. Simple operation, detachable and PLC automatic mode.
5) Cold extrusion will not change the metal material and increase the utilization rate.
Metal Shavings Baler, Scrap Metal Baler, Waste Metal Baler, Sheet Metal Baler, Metal Scraps Baler
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.jiangyinyeya.com