Improper maintenance of mats will become a burden

On the Shanghai Bridge, originally a layer of soft non-slip mats, this design is conducive to pedestrians from top to bottom flyover, but when it breaks after a strong sun exposure, a good anti-slip mat has transformed into a "foot pad" .

Seen on the commercial sea flyover, a non-slip mat made of a rubber sheet with a side length of 50 cm has loosened and fallen off in many areas. The aisles on the eastern side of the bridge were damaged most seriously. Nearly dozens of rubber plates were all displaced and piled together to reveal a white cement bridge. On the stairs at both ends of the bridge, sporadic rubber sheets were also scattered.

Pedestrians crossed the road and crossed their heads in fear of lameness. The public, Miss Zhang, said that the damaged deck not only affected walking but also affected the image of the city. A cleaning lady said: “When this mat is in place, there is very little accumulation of water in the rainy deck and it is more comfortable to walk on. Now that this is broken, the water in the trench is spattered badly and it is difficult to clean it every day.”

According to a staff member of the Xiacheng City Management Office, the non-slip mat on the Shanghai Bridge is maintained by the Hangzhou Urban Infrastructure Development Corporation and is still in a quality return visit. “Because there are more rainy days in late March, maintenance work will begin in early April. The anti-slip mat on the deck will be repaved with some heat resistance.

Jin Yuankang vacuum Evaporation Plating, is in vacuum environment, the material is heated and plated on the substrate called vacuum evaporation. The process by which a substance to be deposited is evaporated in a vacuum or sublimated to the surface of a workpiece or substrate. The metal coating in vacuum evaporation is usually aluminum film, but other metals can also be deposited by evaporation. Metal to evaporation temperature. The steam is then transferred from the vacuum chamber to the low temperature part. The process is carried out in vacuum, and the metal vapor reaches the surface without oxidation.

Evaporation Plating

Evaporation Plating,Pvd Evaporation Plating,Evaporation Metalizing Plating,Vacuum Resistance Evaporation Plating

Jin Yuan Kang Industry Co., Ltd. , http://www.jykplating.com