High Quality 7.89 Auto Plastic Quick Connect Fitting

PRODUCTION SHOW

BUSINESS SCOPE

Quick connector

Fuel pipe line assembly

Urea pipe line assembly/SCR Adblue tube assembly

Pipeline end plug & auto plastic parts

INTRODUCTION OF QUICK CONNECTOR

1) the design and production
Innovative, secure and quick, Our quick connect fittings made of synthetic material are suitable for most media carrying lines. Be it fuel , oil vapor , water cooling and air carrying lines . We offer the idea means of connection. These quick connectors are specially suited to being matched up with the automotive pipe system.
The design and production of quick connector are strictly accord with SAE J2044-2009. Quick connect coupling specification for liquid fuel and vapor or emissions systems . If the product does not meet customer needs, we can design and manufacture according to customers requirements. Plug-in and sel-locking structure enables connect and disconnect more quick and easier. The space required for the operation is only the width of a finger on both sides. These features ensure quicker connector can be high-density arrangement and an increase in customer design flexibility.

2) Security of quick connector
Quick connector with double sealing rings radial sealing structure, modified rubber o-rings used, mainly for fluid The physics chemistry, custom, anti-aging, corrosion, and swelling; outer o-rings are separated by the intermediate spacer ring. Corresponding space on the two sealing ring, rubber substrate bonding does not occur, the outer synthetic rubber o-rings used, Increased mechanical properties. preventing air aging. Sealing ring and spacer ring through the outer ring of elastic clamping device securely fastened in Shell will not result in phenomena such as ring falls of, and shift. Great seal security is guaranteed. 



3) Material Of Quick Connector

 

4) Working environment of quick connector
Gasoline and diesel fuel delivery systems , Ethanol , methanol or natural gas delivery systems or their vapor venting or evaporative emission control systems

 

5) Connect &disconnect peration method of quick connector
Quick connector is made up of body , in o-ring , out o-ring , spacer ring , securing ring and locking spring . When a mating tube end piece inserts the connector , as locking spring has certain elasticity , Tie clip fastener to connect two connectors together ,and then pull back to assure complete connection.; Repair or remove the quick connector is difference . first advance push the male connector and press the clip button , lock expansion , you can easily pull out the connector ;please note,SAE 30th heavy oil lubrication should be used before Reseat


The Step of inserts the connector  


The Step of inserts the connector  

  PRODUCTION SHOW

BUSINESS SCOPE

Quick connector

Fuel pipe line assembly

Urea pipe line assembly/SCR Adblue tube assembly

Pipeline end plug & auto plastic parts

INTRODUCTION OF QUICK CONNECTOR

1) the design and production
Innovative, secure and quick, Our quick connect fittings made of synthetic material are suitable for most media carrying lines. Be it fuel , oil vapor , water cooling and air carrying lines . We offer the idea means of connection. These quick connectors are specially suited to being matched up with the automotive pipe system.
The design and production of quick connector are strictly accord with SAE J2044-2009. Quick connect coupling specification for liquid fuel and vapor or emissions systems . If the product does not meet customer needs, we can design and manufacture according to customers requirements. Plug-in and sel-locking structure enables connect and disconnect more quick and easier. The space required for the operation is only the width of a finger on both sides. These features ensure quicker connector can be high-density arrangement and an increase in customer design flexibility.

2) Security of quick connector
Quick connector with double sealing rings radial sealing structure, modified rubber o-rings used, mainly for fluid The physics chemistry, custom, anti-aging, corrosion, and swelling; outer o-rings are separated by the intermediate spacer ring. Corresponding space on the two sealing ring, rubber substrate bonding does not occur, the outer synthetic rubber o-rings used, Increased mechanical properties. preventing air aging. Sealing ring and spacer ring through the outer ring of elastic clamping device securely fastened in Shell will not result in phenomena such as ring falls of, and shift. Great seal security is guaranteed. 



3) Material Of Quick Connector

 

4) Working environment of quick connector
Gasoline and diesel fuel delivery systems , Ethanol , methanol or natural gas delivery systems or their vapor venting or evaporative emission control systems

 

5) Connect &disconnect peration method of quick connector
Quick connector is made up of body , in o-ring , out o-ring , spacer ring , securing ring and locking spring . When a mating tube end piece inserts the connector , as locking spring has certain elasticity , Tie clip fastener to connect two connectors together ,and then pull back to assure complete connection.; Repair or remove the quick connector is difference . first advance push the male connector and press the clip button , lock expansion , you can easily pull out the connector ;please note,SAE 30th heavy oil lubrication should be used before Reseat


The Step of inserts the connector  


The Step of inserts the connector  

 

belt pressure filter
The dewatering process of belt press filter with Belt Filter Press can be divided into four important stages: pre treatment, gravity dehydration, wedge-shaped area prepressure dehydration and pressing dehydration. All new equipment Filter Press automatic filter press, diaphragm filter press, deep Sludge Dewatering press, integrated sewage sludge treatment equipment, on-line precision Filtration system and other environmentally friendly filter products with reasonable price and reliable performance.
brief introduction
belt pressure filter
Structure introduction
The belt press filter is mainly composed of the driving device, the rack, the press roll, the upper filter belt, the lower filter belt, the filter belt tensioning device, the filter belt cleaning device, the discharging device, the gas control system and the electric control system. China has a large number of industrial chains, low production concentration, low level of research and development of high-end products, low manufacturing technology in the belt filter press industry, and the expansion of the import and export trade deficit.  The next few years will be the high-speed concussion period of the belt filter press industry. The direct consequence of this high-speed oscillation is the expansion of polarization in the brand camps. There are absolutely not many enterprises that can really survive in the market in the next few years. But this high-speed oscillation of belt filter industry will bring huge opportunities, and the result of turbulence will make the operation of the market more rational. The road of high-end electric home localization is "bumpy". The foundation has become a short board which restricts the development of the belt filter press industry to the high end. In 12th Five-Year, the government will continue to increase the domestically made efforts of the high-end equipment parts of the belt press. The products are also widely used for environmental protection, municipal, mining, electric, chemical, electronic, food and food products. All walks of life, such as pharmaceuticals, textiles and other industries.
belt pressure filter
The structure and working conditions of the main components are briefly introduced below.
1 rack: the belt press filter rack is mainly used to support and fix the press roller system and other components.
2 the press roller system is composed of a roller arranged in diameter from big to small. The sludge is clamped by the upper and lower filter bands, and the pressure gradient is formed under the action of the strain of the filter. The pressure of the sludge in the process of dewatering is increasing, and the water content in the sludge is gradually removed.
3 gravity dewatering device: mainly composed of gravity zone bracket and material trough. After the flocculated material is removed, a large amount of water is removed in the gravity area and its fluidity becomes worse.
4 wedge zone dehydration device: the wedge zone formed by the upper and lower filter belt exerts pressure on the gripped material and prepressure dehydration to meet the requirement for the liquid content and fluidity of the press dehydration section.
5 filter band is the main component of the belt press filter. The separation process of the solid and liquid phase of the sludge is all above and the filter zone is the filter medium. The pressing force is obtained by passing the press roll under the tension force of the upper and lower filter bands.
6 filter adjustment device: from the executive parts: cylinder, adjustment roller signal, anti air pressure, electrical system. Its function is to adjust the deviation of the filter band caused by the uneven tension of the filter belt, the installation error of the roller and the unequal feeding, so as to ensure the continuity and stability of the belt press filter.
7. filter cleaning device: consists of sprinkler, washing water cartridge and cleaning hood. When the filter belt walks, the cleaning device is continuously washed and the pressure water is impacted by the sprinkler. The material remaining on the filter strip is separated from the filter zone under the action of pressure water, making the filter regenerated and preparing for the next dehydration process.
The 8. filter belt tensioning device consists of a tensioning cylinder, a tensioning roll and a synchronous mechanism. Its function is to tighten the filter belt and provide the necessary tension conditions for the production of pressing force of the squeezed dehydration. The adjustment of the tension size can be achieved by adjusting the pressure of the tension cylinder of the pressure system.
9 discharge device: composed of scraper plate, tool carrier, discharge roller, etc., its function is to peel the dehydrated cake and filter belt to achieve the purpose of discharging.
10 transmission device: by motor, reducer, gear transmission mechanism and so on, it is the power source of the belt walking, and can adjust the speed of the reducer to meet the requirements of different speed in the process.
11 air pressure system: the system is mainly composed of power source (gas storage tank, motor, gas pump, etc.), actuating components (cylinder) and air pressure control elements (including pressure relay, pressure flow and direction control valve). Through the air pressure control element, the air pressure, the flow and the direction are controlled, and the pressure and speed of the pneumatic actuator are guaranteed, and the work is done normally according to the predetermined program. It is the power source to complete the tightening and adjusting operation of the filter belt.

Belt Filter Press

Belt Filter Press,Sludge Dewatering,Belt Filter Press Machine,Belt Power Filter Press

Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com