Model NO.: CTB CTN CTY
Model NO.: CTB CTN CTY
In order to improve the efficiency of mineral processing, reduce the cost, improve the recovery rate of concentrate powder, mineral magnetic separator used the latest production technology and the latest research results of magnetic materials.As a result of the computer simulation design, making separator tank is more suitable for the flow of magnetic materials, recycling and pulp, scattered. Through a new magnetic circuit design, in the slot scan selected region to produce a large magnetic field gradient and to obtain the magnetic particles greater adsorption capacity. Meanwhile, it also makes the energy concentrated in the medium flow layer, don't waste outside the tank, grasp the these factors are hungry magnetic separator to achieve better effect.
With the new magnetic circuit design, more and more magnetic poles are designed in the area, which can increase the stirring effect. The separation of magnetic and non magnetic materials is more rapid, and the recovery rate of concentrate powder is higher.
Characteristic:
1, according to the different stages of the ore selection characteristics were designed to select, coarse, selection and other magnetic separation machine.
2, the use of advanced magnetic circuit design, magnetic distribution uniformity, high permeability depth, high recovery rate, select the use of multi pole structure, it is beneficial to improve the grade of concentrate.
3, the tank structure is reasonable, beneficial to pulp through, to prevent clogging, and are arranged at the two ends of silt discharge mechanism, easy for maintenance and cleaning.
4, the transmission device is stable and reliable, the whole performance is good, can be a long time without fault operation
1.CTB Permanent-Magnetic Drum Separator
   The permanent magnetic drum separator are used in mines and coal separating factories to separate the wet fine magnetic substances or remove the magnetic substances from the non-magnetic materials.
  The separators have three types of tanks :half countercurrent tank (CTB),direct flow tank(CTS) and countercurrent tank(CTN),which are used according to different granular and technological requirements.
  The features of our products are :optimized computer design ,rational magnetic circuit, strong magnetic coercive force and high-remanence permanent magnetic which can keep the magnet performance in a long period and safeguard the long -term interest of the customer, the whole structure is reliable.
2.NCTB Dewatering Magnetic Concentrated Separator
  It is used to improve the concentration, designed for the magnetic separation processing the low concentration of slurry .
 The magnetic separator capable of dewatering effectively has simple structure and high efficiency, concentrateconcentration can reach up to 68% above, large broad-angle magnetic system, ore recovery rate can reach 99.5%
High magnetic intensity, low energy consumption.Drum reverse rotation, unloading ore side using scraper instead of the water.
3.CTDM Multi-Pole Pulse Magnetic Separator
CTDM multi-pole magnetic separator is a kind of new-type effective permanent magnetic separator designed by our company for the low-grade mineral ores. The equipment can upgrade the product remarkably.
  The multi-pole is arranged in the internal magnetic system and can increase the stirring of the magnetic particles and generate sedimentation, absorption in the magnetic field pulse. The broad-angle magnetic system can effectively eliminate the gangue and clay of magnetic minerals. The separators are equipped with half countercurrent tank and can achieve high quality mineral and high reclaiming rate.
 In order to improve the efficiency of mineral processing, reduce the cost, improve the recovery rate of concentrate powder, mineral magnetic separator used the latest production technology and the latest research results of magnetic materials.
As a result of the computer simulation design, making separator tank is more suitable for the flow of magnetic materials, recycling and pulp, scattered. Through a new magnetic circuit design, in the slot scan selected region to produce a large magnetic field gradient and to obtain the magnetic particles greater adsorption capacity. Meanwhile, it also makes the energy concentrated in the medium flow layer, don't waste outside the tank, grasp the these factors are hungry magnetic separator to achieve better effect.
With the new magnetic circuit design, more and more magnetic poles are designed in the area, which can increase the stirring effect. The separation of magnetic and non magnetic materials is more rapid, and the recovery rate of concentrate powder is higher.
Characteristic:
1, according to the different stages of the ore selection characteristics were designed to select, coarse, selection and other magnetic separation machine.
2, the use of advanced magnetic circuit design, magnetic distribution uniformity, high permeability depth, high recovery rate, select the use of multi pole structure, it is beneficial to improve the grade of concentrate.
3, the tank structure is reasonable, beneficial to pulp through, to prevent clogging, and are arranged at the two ends of silt discharge mechanism, easy for maintenance and cleaning.
4, the transmission device is stable and reliable, the whole performance is good, can be a long time without fault operation
1.CTB Permanent-Magnetic Drum Separator
   The permanent magnetic drum separator are used in mines and coal separating factories to separate the wet fine magnetic substances or remove the magnetic substances from the non-magnetic materials.
  The separators have three types of tanks :half countercurrent tank (CTB),direct flow tank(CTS) and countercurrent tank(CTN),which are used according to different granular and technological requirements.
  The features of our products are :optimized computer design ,rational magnetic circuit, strong magnetic coercive force and high-remanence permanent magnetic which can keep the magnet performance in a long period and safeguard the long -term interest of the customer, the whole structure is reliable.
2.NCTB Dewatering Magnetic Concentrated Separator
  It is used to improve the concentration, designed for the magnetic separation processing the low concentration of slurry .
 The magnetic separator capable of dewatering effectively has simple structure and high efficiency, concentrateconcentration can reach up to 68% above, large broad-angle magnetic system, ore recovery rate can reach 99.5%
High magnetic intensity, low energy consumption.Drum reverse rotation, unloading ore side using scraper instead of the water.
3.CTDM Multi-Pole Pulse Magnetic Separator
CTDM multi-pole magnetic separator is a kind of new-type effective permanent magnetic separator designed by our company for the low-grade mineral ores. The equipment can upgrade the product remarkably.
  The multi-pole is arranged in the internal magnetic system and can increase the stirring of the magnetic particles and generate sedimentation, absorption in the magnetic field pulse. The broad-angle magnetic system can effectively eliminate the gangue and clay of magnetic minerals. The separators are equipped with half countercurrent tank and can achieve high quality mineral and high reclaiming rate.
Â
Water jet cutting as a cold cutting technology can
cut a variety of materials, because it does not produce thermal deformation. Waterjet metal cutting is the most widely used, although for carbon steel,
stainless steel and other materials,
you may choose to use flame, plasma cutting or laser cutting, but it is limited by the thickness of the plate, and will produce thermal deformation, so thta can not achieve the best effect.
Water cutting metal allow up to 150mm thickness of stainless steel, as well as other materials such as aluminum 200mm thick, there are some very high hardness of alloy, such as magnesium alloy, super hard wear-resistant steel and so on. In practice, we also used waterjet steel cutting machine to process the wheels of cars. In addition, for some ultra-thin metal materials, water jet cutting also has the advantage of smooth cutting edge, without any burning traces, which is why water jet cutting is more and more popular.
water cutting metal,water jet steel cutting,waterjet steel cutting machine,waterjet aluminum,waterjet stainless steel
YC PRECISION TECHNOLOGY & MACHINERY CO.,LTD , https://www.yc-technology.com