Dongfeng Doolika high pressure cleaning car high pressure water jet cleaning technology

Dongfeng Duolika high pressure cleaning truck can be equipped with sprinkler device, install green sprinkler, front punch, rear sprinkler, side spray, can carry out green watering, spraying, dust, high pressure flushing the road, etc., can be used to save fire in an emergency. It is mainly used for cleaning the sediments of urban sewers and pipelines, and the dredging of mudslides in dead corners. It can also be used for cleaning industrial drainage pipelines, wall surfaces, etc., cleaning roads and square grounds.
The high-pressure water jet of the Dongfeng Dolika high-pressure cleaning truck is a high-pressure cleaning device that passes the high-pressure cleaning vehicle to press normal water to hundreds or even thousands of atmospheric pressures, and then through a special nozzle at a very high speed (200-500 meters). / Second) A very high energy stream is ejected. This small stream of water has enormous energy like bullets. It can remove salts, alkalis, scales and various blockages on the inner wall of pipes, and can also cut steel plates, remove sand from castings, and remove metal from rust. The use of this highly energy-rich water stream for cleaning is a high-pressure water jet cleaning. Thanks to the superiority of this process, more and more users have already received the pro-gaze. What are the advantages of high-pressure cleaning of Dongfeng Doolica high-pressure cleaning vehicle?
1. The water jet cleaning of Dongfeng Dolika high-pressure cleaning vehicle does not produce as much dust as blasting shot blasting and simple mechanical cleaning, polluting the atmosphere and damaging human health. Unlike chemical cleaning, there are a lot of acid and alkali wastes that pollute the river, soil and water quality. Water jet is based on tap water as the medium, odorless, odorless, non-toxic, completely environmental protection without pollution.
Second, the purely physical method does not have any corrosive effect on the pipeline. III. Wherever the water jet can reach directly, no matter whether it is the pipeline and the inner cavity of the container, or the surface of the equipment, whether it is a hard fouling material or a solid plugging material, It can be quickly separated from the mother and thoroughly cleaned. This kind of cleaning method of Dongfeng Duolika high-pressure cleaning vehicle has no special requirements for the material, characteristics, shape and scale type of the equipment. As long as it is direct enough, it is widely used. First of all, the Dongfeng Doolika high pressure cleaning truck saves water and energy, high pressure cleaning water consumption is only 3-5 cubic meters / hour, the power used is only 37-90 kilowatts; second; without any filler and detergent Third, the medium used by high-pressure water jets of high-pressure cleaning vehicles is tap water;
5. When the Dongfeng Doolika high-pressure cleaning vehicle cleans the inner hole of the pipeline and the heat exchanger, it can remove all the foulants and plugs in the pipe, and the metal body can be seen. High-pressure water jets with huge energy and moving at supersonic speed can easily destroy the hard foulants and plugs in the pipeline. At the same time, the pressure of the high-pressure water is less than the compressive strength of the pipeline, and it has no damage to the pipeline. It is truly High quality dredge cleaning. The traditional bamboo dredge and dredge dredging can only solve the temporary flow of the pipeline, and can not fundamentally solve the problem of six, due to the Dongfeng Doolika high-pressure cleaning vehicle water jet (also known as water bomb) erosion, demerits, shears Cutting, grinding and other composite crushing action can immediately break the scale off. It is several times to dozens of times faster than conventional chemical methods, sand blasting methods, simple mechanical and manual methods, and is very efficient.

EVA Traction Pad

EVA Traction Pad is the tail pad to be sticked on the surfboard. It comes with center arch and kick tail, which allow surfers to control the direction and stability when surfing in the sea.

The design of surfboard traction pad can be in one piece, two pieces, or three pieces basically. The standard the classical texture for traction pad would be diamond like texture, as it can provide the stronger grip among all of them.

EVA Traction Pad
There are two ways to make the logo on the traction pad, one is PVC logo, the other one is EVA color connect logo.
EVA Traction Pad
PVC logo is a very simple idea, just make a PVC logo based on the design and insert it into the traction pad. One advantage of PVC logo is that it can be more detailed and complicated than the EVA color connect logo. And it can be repeatly used on other pads without any more setup tooling charge.

The EVA color connect logo is made along with the pad itself. Unlike the PVC logo, it is also EVA material same as pad, and also shows with the texture. The design of this logo can not be too detailed and small, it needs to be larger and simpler so that we can use the different color EVA material to connect them.

Eva Traction Pad,Non-Skip Traction Pad,Traction Pad,Surfboard Tail Pads,Grip Tail Pad,Eva Tail Pad

Huizhou City Melors Plastic Products Co., Limited , https://www.thefoammaster.com

Posted on