Introduction: The industry of steel processing machinery and equipment applications is very extensive. The steel processing machinery and equipment introduced for everyone are as follows: GW series steel bending machine, GQ series steel cutting machine, GTQ4 series steel bar straightening and cutting machine. These devices are the most common and practical ones.
First, GW series steel bending machine
The GW40/GW42/GW50 steel bending machine, due to its simple structure, reliable operation, and flexible operation, can bend 6-40 mm or 6-50 mm steel bars into various shapes required for bridges and construction projects. The construction, prefabrication of the bridges, and construction sites are my own welcome. The steel bending machine is easy to operate and maintain, so it is more suitable for the construction of the current construction. After the machine is used for a period of time, the working disk should be used in a 180 degree orientation, so that the internal parts also change the 180 degree position so that the machine parts can achieve uniform wear and prolong the service life of the machine.
Second, GQ series steel cutting machine
Rebar cutters are a type of equipment used for shear reinforcement. There are generally automatic steel cutting machines and semi-automatic steel cutting machines. This equipment is one of the indispensable equipments for steel bar processing and is mainly used for the fixed length cutting of steel bars in housing construction, tunnels, power stations, bridges, and large-scale water conservancy projects. Compared with other cutting equipment, the steel bar cutting machine has the characteristics of light weight, reliable operation, low energy consumption, and high efficiency. Its basic models are GQ40, GQ42, GQ50 and its variants.
Third, GTQ4 series steel straightening cutting machine
The role of the steel bar straightening and cutting machine is mainly for the steel processing work of the construction site, trenches, steel processing plants and other environments. The advantage of the Shenxin brand steel bar straightening and cutting machine is that it improves work efficiency and saves manpower cost.
The steps are:
1. When the machine is installed, ensure the level and stability of the installation floor during the fixed installation, and move it to a fixed moving walk.
2. Before starting the machine, first manually rotate the machine's flywheel, check the drive system working device, and then adjust the clearance and fix the bolt. Wait until all inspections have been completed. After the problem has been solved, start the machine to run idle and check again if the machine has abnormal reactions. After all problems are eliminated, work begins.
3, before the transmission of steel, first adjust the diameter of the rebar, using the appropriate straightening and transmission speed. The adopted straightening aperture should be 2-5mm larger than the diameter of the rebar. The transmission speed is determined according to the diameter of the steel. The diameter is large and the speed is slow. After everything is adjusted, fix it and fasten it and cover it.
4. When reinforcing bars are transported, the steel bars must be cut off. A 1m-long steel pipe is installed in front of the guide tube, and the steel is first penetrated into the steel pipe, and then the knife is adjusted to straighten the hole in the front end. After the rebars are integrated, ensure that there is a certain distance between the hand rotations and do not approach and avoid dangers.
5. After the machine cuts off a few steel bars, the machine is shut down, and the steel bars that have been processed are checked to see if they meet the standards and standards.
6. After the work is completed, turn off the machine, cut off the power supply, tidy up the work site, and do a good job of machine lubrication.
Rubber Base,Anti-Slip Rubber Base,Rubber Base Mat For Home,Rubber Base Mat
Yantai UVT Sports Co.,Ltd. , https://www.uvtgolf.com