We all know that the drive system of CNC flame Cutting Machine is composed of two important parts: drive device and deceleration device. The gear reducer in the deceleration device provides operation power for the CNC cutting machine, and also provides guarantee for the running accuracy of the entire machine. The main function of the drive device and the deceleration device in the CNC flame cutting machine is to control the speed of the cutting machine. Their position in the CNC flame cutting machine is just like the human limbs. If the normal maintenance of the gear reducer is not paid attention to, it will affect the normal operation of the entire cutting machine. Today, Wuhan Naiba CNC Technology Co., Ltd. and our customers together, to understand the gear reducer installation and use of the matters needing attention:
First, the gear reducer should be firmly mounted on a stable level foundation or foundation. It requires that not only the oil in the oil drain can be eliminated, but also the cooling air circulation should be smooth. If the foundation is not reliable, the gear reducer will cause vibration and noise during operation, and will cause damage to the bearings and gears. Thus, the cutting effect of the CNC flame cutting machine produces marketing. As the so-called high-rise buildings rise from flat grounds, the foundation plays an important role in the entire building. The base of the gear reducer is equally important.
Secondly, during the process of installing the speed reducer on the CNC flame cutting machine, attention should be paid to the alignment of the transmission center axis, and the error should not be greater than the usage compensation amount of the used coupling. The benefit of centering the axis of the transmission center is to extend the service life and achieve the ideal transmission efficiency. Therefore, in order to use our CNC flame cutting machine longer, we must pay attention to this problem when installing the reducer.
Third, when we install the transmission component on the output shaft, it is not allowed to strike with a hammer, otherwise it may cause damage to the internal parts of the reducer. Our approach is to use the assembly fixture and the internal thread of the shaft end to press in the transmission element with bolts. If the internal parts of the reducer are damaged, it is bound to affect the normal operation of the cutter.
Fourth, in the process of installing the speed reducer, we must ensure that the staff can easily approach the oil mark, air plug, and oil drain plug. Because the reducer is lubricated by the oil pool splash, the user needs to remove the plug of the vent hole and replace the vent plug before operation. If you do not reserve enough space, you will be troubled by the work of the staff.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
Cutting Machine
1. Special cutting, long service life cutter, easy adjustment, full-automatic adjustable for feet cutter length and material guide rail width. Parameters can be adjusted on touch screen.
2. Apply to mass production, device with excellent feet cutter.
3. PLC control is applied for the entire system with strong stability; touch screen for operating port which is convenient for learning and data adjustment.
4. Apply to electrolytic capacitor, metalized film capacity, safety capacity and other vertical type components.
5. Intelligent device, automatic switch without turning the screw.
Bulk Radial Lead Cutting Machine,Automatic Shearing Machine,Crystals Trimming Pin Molding,Transistors Cutting Foot
SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com