The loop resistance tester contact resistance is the additional resistance that occurs when the static contact and the movable contact contact each other.
2. What are the parts of the circuit breaker contact resistance?
From the dynamic and static contact parts of the contraction resistance and surface resistance of two parts.
3, loop resistance tester circuit breaker contact resistance failure reasons?
1) When the large short-circuit current is broken, the contact is burned out.
2) Due to the poor adjustment of the mechanism, the stroke may be changed. When the overtravel is severely unqualified, the contact pressure or contact area may change.
3) After the circuit breaker is commissioned and installed, it has not been put into operation for a long time, so that the surfaces of the movable and static contacts are oxidized and the surface contact resistance increases.
4) Long-term operation deforms the spring and reduces the contact pressure.
5 ) Mechanical wear caused by long-term operation of mechanical part of loop resistance tester .
6) For the low oil circuit breaker, it may also be acidic due to the failure of insulation oil and acid value, and etch the surface of the contact. Or floating impurities in the oil, due to breaking short circuit current between the moving and static contacts. Residual particulate carbonaceous, metal powders increase contact resistance.
4. What are the factors affecting the contact resistance of the loop resistance tester ?
1) Material properties: resistivity, hardness, chemical properties, mechanical strength and resistivity of metal compounds.
2) Contact form: point contact, line contact, surface contact.
3) Contact surface conditions: When the contact surface forms an oxide film (except for silver), the oxide film has a much larger resistance than the metal itself.
4) Contact pressure.
5) The roughness of the contact surface.
Shanghai Miyuan Electric Co., Ltd. produces and sells the following products: ZGF DC high voltage generator, high voltage voice phasor, DC resistance tester, battery load tester, loop resistance tester, microcomputer relay protection tester, grounding resistance Tester, high-voltage wireless nuclear phase analyzer, high-voltage test transformer, DC single-arm double bridge, DC high-voltage generator, tubular electric heater, dielectric oil dielectric strength tester, watch-type near-electricity alarm, zinc oxide arrester tester , loop resistance tester, insulation resistance tester, high voltage megohmmeter, high voltage insulation mat, short circuit ground wire, portable dynamic balance measuring instrument, on-site dynamic balance measuring instrument, long-distance infrared thermometer, high-voltage insulation mat in distribution room, Transformer loss parameters intelligent tester, insulated boots gloves pressure test device, transformer characteristics integrated test bench, tie rod flow meter, ultra high voltage withstand tester, three-phase multi-phase volt ammeter, intelligent dielectric loss tester, intelligent Loop resistance tester, lightning counter calibrator, transformer on-load switch parameter tester, mine cable fault detector, oxidation Arrester detector, immersed tubular electric heater, DC resistance meter, digital ground resistance meter, portable digital vibration meter; infrared thermometer, frequency conversion series resonant test device, high current generator, vacuum oil filter manufacturer, resistance Voltage tester, wireless high-voltage nuclear phase meter and so on.
Architectural Tension Bar For Construction
High Strength Steel Tie Rod are steel structural members made of carbon structural steel and alloy steel, processed by machining, heat treatment and surface anti-corrosion treatment, supplemented by adjusting sleeves, lock and joints etc. The steel tie rod are important components of steel structures for construction of giant, large span buildings and ship docks. They are mainly used for prestressed parts and large span buildings in construction projects. While the strength of the product is improved, but the plasticity index is not reduced, which satisfies the principle of using the same amount of strength in the architectural design. The tie rods, tie bars, tension rods and tension bars steel grades are specified as grade 460, grade 520, grade 550, grade 650.
Tension Bar,High Tensile Steel Rod,Structural Tension Rods,Architectural Tension Bar For Construction
SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdthreadedrods.com