You must know about this knowledge of the swing gate.

The swing gate is commonly referred to as flapping gate in the rail transit industry. The shape of the blocker (bump pendulum) is a plane with a certain area, perpendicular to the ground, and it is blocked and released by rotation and oscillation. The swing gate is composed of chassis, movement, swing arm, control system, infrared sensor and control equipment.

Swing gates are suitable for applications where the channel width requirements are relatively large, including occasions where there are more pedestrians or bicycles carrying baggage, and special channels for people with reduced mobility. Also suitable for applications where high aesthetics are required. Such as community schools, attractions, ports, airports, stations and so on.

The advantages of the swing gate:

1. There is no mechanical collision during the gate swing operation, and the noise is relatively small.

2. Compared with the triple roller gates, the bridge-type swing gates increase the pedestrian traffic detection module, which can effectively detect the passing target and have strong anti-trailing capability.

3. The range of channel width is the largest among all the gates, generally between 550mm-1000mm. Some high-end products can be 1500mm, which is more suitable for the passage of pedestrians or bicycles carrying baggage, and can also be used for mobility inconvenience. Dedicated channel.

4. Appearance form plasticity is the strongest among all the gates. The material type of the blocker is rich, and the shape of the cabinet is also diversified. It is easy to design a very beautiful shape. Therefore, it is commonly used in office buildings, intelligent buildings, clubs and other high-end applications. .

The disadvantages of the swing gate:

1, the technical requirements of the manufacturers are relatively high, if the design is not good will greatly reduce the reliability of the product, as well as reduce the ability to prevent personal injury against clips and collisions.

2, some models lack of waterproof and dustproof, only suitable for indoor, environmental adaptability is not strong with three roller gate.

3, the cost is higher, especially for some special custom models, such as increasing the width of the channel, the use of special material gate swing, the technical difficulty will increase accordingly.

4. Due to the restriction of the shape of the blockage body, the impact resistance of the swing gate is lower than that of the three-roll gate, and the illegal and rapid passage of the pendulum gate can easily damage the swing pendulum and the movement. Triptych