Xingshunan three roller gate aluminum plate installation tips

Xingshun An company specializes in the production of three roller gates, swing gates, wing gates, full gates, speed through gates and other pedestrian channel gates, choose a professional, they choose to trust, Xingshun An every product, every detail to the extreme, below The introduction of a component of the three-roll gate in the passage gate is an assembly, and it is also a problem that many customers often mention. I hope to help everyone.

When the three-roll gate is delivered from the factory, the three-roll gate brake rod is generally removed to save space and meet the packaging needs, but it will bring a little trouble to the customer's installation and use. The first contact with customers, see these three rollers Brake parts do not know how to install. The gates are usually packaged next to the machine. Open the box to see the brake levers and manual keys, etc. Of course, the manuals and keys should be kept well. The Xingshunan aluminum plate assembly is generally composed of small locks, large locks (and brakes). Link) aluminum plate, pin and other components, the small lock is usually on the aluminum plate, with M6 Allen wrench loosen the pin on the big lock fixed position, remove the pin, pin diameter 12mm, with the left hand to Inside the small lock, the small lock is opened outwards under the action of the shrapnel, and it resists the small lock. The big lock only has the place to put it in, so you can't directly install the big lock, so it is easy to cause damage. The principle is that the small lock and the large lock have a contact surface that can be combined together. The brake lever can be straightened and staggered. The brake lever will fall into the lever and the M6 ​​screw will be fastened after being installed. When the first one is installed, , The installation of the second should pay attention to the small locks stuck aluminum plate, need to lift the drop device. After each installation, tighten the screws and apply a little bit of butter to the joint surfaces of the two locks to provide lubrication.