Talking about the Soft Measurement Principle of Differential Pressure Weilab Flowmeter

According to the production process requirements, the power meter flow meter measures the amount of flue gas and the total recovered gas volume of the four converters in the collection computer, and uses the soft measurement technology of the power meter flowmeter to virtualize the smoke volume of the four converter flue gas meters. Logic instruments such as recoverable gas and recovered gas are shown in Figure 3.

The flow measurement of the converter gas was completed by 5 test tube power meter flowmeters. At the control station of the four converters, the recovery signal is allowed, and the recovery signal and the gas flow signal are transmitted to the acquisition computer through the network. When the gas analyzer measures that the CO content of the converter gas is higher than 30% and the O2 content is less than 2%, the recoverable gas switch signal is "ON", and the recoverable gas flow rate can be calculated.

When the gas pressure is lower than 6.8 kPa, the operator starts the gas recovery device, and the recovered gas switch signal is “ON”, and the recovered gas flow can be calculated. One measuring tube flowmeter logically realizes three instrument functions, so that there are 12 logical instruments, which are realized by four physical flow meters. The calculation model can use the following formula:

Where: Qo is the flue gas flow; Qk is the recoverable gas volume; Qy is the recovered flue gas flow rate; Kk is the recoverable gas switch quantity signal; Ky is the recovered gas switch quantity signal.

The power meter flow meter can calculate the accumulated value of the amount of flue gas, the amount of recoverable gas, and the amount of recovered gas by using the integral method.

Universal RTP

Structure: it is composed of high molecular functional polyethylene resin, 1-6 layers of polyester
industrial filament winding and impact resistant polyethylene resin.
Application: it is used in oil and gas gathering and transportation, injection, produced water and
sewage transportation systems in oil and gas fields
Temperature range: - 40 ℃ ~ 65 ℃
Standard: SY / t6662 2-2020 Q/XXCJ282-2020
Characteristics: it is suitable for the transportation system of petroleum based and water-based
liquids

Appearance: the appearance is black smooth

Universal Rtp are pipes that are made from a combination of plastic and reinforcing materials, composed of high molecular functional polyethylene resin, 1-6 layers of polyester industrial filament winding and impact resistant polyethylene resin. These pipes are often used in gas,oil&Liquids.


Flexible composite high-pressure conveying pipe is a new type of flexible composite pipe with
three-layer structure. Due to different conveying media and uses, there are many innovations and
breakthroughs in material selection, structural design and process equipment.
Polymer liner


Universal Rubber Rtp,Rubber Fuel Hose,High Pressure Rubber Fuel Line,high Pressure Flexible Pipe

Shaanxi Yanchang Petroleum Northwest Rubber Flexible Pipe Co., Ltd. , https://www.cnrtp.com

Posted on