CNC blanking equipment is popular in the manufacture of machinery, such as lathes, planers and other common equipment, generally small and medium-sized factories are easy to accept at the time of purchase. In order to speed up the automation process of China's cutting process, it is necessary to make this equipment "popular" in terms of price.
The use of numerical control equipment for flame cutting or plasma cutting has different characteristics from the processing of a certain process with other numerical control equipment. For the CNC cutting equipment, only those who have high cutting technology can operate well to get good results. Gas cutting workers are the most introspective of flame regulation. Plasma cutting workers are most familiar with plasma cutting technology. These workers are often limited by the degree of education. They are afraid of the word “CNCâ€. Various procedural expressions require more investment. A lot of energy is required to get started, and it is not worthwhile to have a dedicated computer operator.
Therefore, in order to increase the numerical control process of the blanking work, it is necessary to make the operations directly face the workers. For programming, press the “Line†button to indicate that you want to input a straight line later, and use the current position as the starting point of the line, then type the end point coordinates (X, Y) of the line, and the line ends programming. If supplemented by voice prompts, the operator will be more comfortable and comfortable to use.
In general, if you can make the operation to let the operators with the junior high school education degree directly read the instructions, you can learn all the operations in one day, or under the guidance of a special person, learn the operation in 2 to 3 hours. It will not become a concern and burden in operation.
(Finish)
Plastic Flowmeter is a widely used instrument in water treatment engineering, mainly used for flow detection, usually installed after the water pump, to control the water intake of each structure, currently the most widely used are electromagnetic flowmeter and ultrasonic flowmeter. In the selection of the flowmeter, the first thing to consider is the corrosiveness of the measured medium to the flow-passing parts, so as to avoid affecting the service life of the flowmeter due to the corrosion of the medium; During the design and installation process of the flowmeter, the length of the straight pipes before and after the flowmeter needs to be considered. Usually, the principle of 5D before and 3D after the flowmeter is followed. Here, D is the inner diameter of the pipe. If the length is insufficient, the measurement accuracy will be affected. When using an ultrasonic flowmeter, the distance between the first 10D and the rear 5D must be met, and the distance from the flowmeter to the water pump must be more than 30D.
When selecting the type, the flow rate of the medium in the pipeline needs to be between the maximum value and the minimum value of the selected flowmeter, and avoid approaching the maximum or minimum value, so as to avoid affecting the measurement accuracy.
Plastic Flowmeter,Acrylic Flowmeter,Solenoid Valve,Liquid Filled pressure gauge
Hebei Chengda Water Technology Co.,Ltd. , https://www.arclionchengda.com