As the name implies, the emergency water truck is a moving vehicle used for emergency and providing clean water.
The clean water truck can be purified to a standard drinking water source. The purified water volume per hour is about 5 kiloliters, which is about 120,000 liters a day. Then it is calculated based on 4 liters of water per person per day, which means that 30,000 people can drink each day. At present, the largest domestic urban emergency water purification vehicle mainly contains stainless steel centrifugal pumps and stainless steel multi-stage pump products, which can supply clean water to the maximum. And the water purification capacity of stainless steel products is stronger than other metal materials.
The most important feature of the urban emergency water purification truck is that it is smart, can go to a designated destination anytime, anywhere, and can also work 24 hours a day. And its operation is very simple, only need to operate on the control panel. At the same time, the car is equipped with a long-distance transporting water pipe, which can be used to pump raw water at a distance of 100 meters for purification before being supplied, or the purified water can be delivered to the emergency water demand area within 100 meters as required.
Some emergency water purification trucks have only been used in military equipment in recent years, for example, for field training, or to support certain disaster areas such as earthquakes, landslides and other disaster-hit areas for temporary emergency water supply. In addition, the maintenance cost of the emergency water purification truck is very low, and the cost for maintenance every week is almost zero, and it can be washed with water. And in normal use, the cost per litre of purified water is generally between 0.13 and 0.15 yuan. Because of the low cost, some urban areas have taken the lead in launching an urban emergency water safety protection system as early as a few years ago, and established a national urban emergency water supply service center. In recent years, there has been a local phenomenon where tap water cannot be normally supplied. The emergency water purification truck will send the “source of life†to the public from a special water storage point.
EVA Traction Pad is the tail pad to be sticked on the surfboard. It comes with center arch and kick tail, which allow surfers to control the direction and stability when surfing in the sea.
The design of surfboard traction pad can be in one piece, two pieces, or three pieces basically. The standard the classical texture for traction pad would be diamond like texture, as it can provide the stronger grip among all of them.
The EVA color connect logo is made along with the pad itself. Unlike the PVC logo, it is also EVA material same as pad, and also shows with the texture. The design of this logo can not be too detailed and small, it needs to be larger and simpler so that we can use the different color EVA material to connect them.
Eva Traction Pad,Non-Skip Traction Pad,Traction Pad,Surfboard Tail Pads,Grip Tail Pad,Eva Tail Pad
Huizhou City Melors Plastic Products Co., Limited , https://www.melorsmarine.com