Pet Bottle Washing Line/Pet Washing Line/Waste Plastic Recycling Machine

  • Model NO.: PET-500
  • Plastic Type: PET
  • Automation: Automation
  • Certification: ISO9001:2008, CE
  • Power: 220kw
  • Voltage: 380V, 50Hz, 3phase(Customized)
  • Blades Material: SKD-11
  • Motor: Siemens
  • Warranty: One Year
  • Transport Package: Seaworthy Packing
  • Origin: China
  • Material Processed: Plastic Bottle
  • Screw: Single-Screw
  • Computerized: Computerized
  • Capacity: 500kg/H
  • Mesh Diameter: 10mm
  • Humidity: Less Than 1.5%
  • Electric Components: Siemens or Schneide
  • Bearing: NSK
  • Trademark: KWELL
  • Specification: 30*3.5*4.5m
  • HS Code: 8477800000
PET Bottle Washing Line/Pet Washing Line/waste plastic recycling machine

Machine Application:
Generally refers to the use of PET bottles, after appropriate processing, reduction of material PET, for then made products, especially as the chemical fiber textile materials greater amount.

As the PET bottle is widely used in beverage, food oil, due to health reasons, can only be used once, equipment so the recycled PET bottles have to attention. The bottle cap, bottle separation PET bottles on the drag is PE, can also be centralized treatment and recovery.

Recycling of waste plastic film are also popular, generally only plastic crusher can not be universal, other equipment and equipment for the recovery of PET the same. Recycling equipment, recycling to the plastic quality is different, the key of which is to what degree cleaning.


According to the final usage of PET flakes, KWELL's PET recycling and washing system divides into 4 categories:
1. Bottle to bottle grade, PET bottles recycling and washing line
2. Yarn/filament grade, PET bottles recycling and washing line
3. PSF grade, PET bottles recycling and washing line
4. Regular grade, such as strapping, brusher making, etc., PET bottles recycling and washing line


Machine Performance characteristic:
1. Final Recycled PET Flake Quality Standard Parameters:
Index Parameter
PET flake size 8~12 mm
Moisture < 1.5 %
Viscose < 20 ppm
PP/PE < 20 ppm
Metal < 20 ppm
Other color PET flake < 30 ppm
Label < 20 ppm
PVC < 30 ppm
Total impurities < 100 ppm
PH neutral
Bulk density 0.3g/cm3

2. Estimated Plant parameters:
Capacity(kg/h) Installation Power(kw) Required Area(m2) Manpower
500 220 600 8
1500 430 800 12
3000 650 1000 18
6000 1000 1400 30

Machine Process Flow Introduction:
Bottle bales→Bale Opening→Trommel Filtering→Label Removing→Bottle Pre-washing→Manual Sorting→Wet Crushing→Floating Washing→Drying→Hot Flotation Washer→Drying→Continuous Friction→Continuous Floating Washing→Drying→Label&Dust remover→Flake Optical Sorting→
Packing→Clean Flakes


Machine Main Parts' Parameter lists: 
1. De-laber
Bottle bale opening 

2.Belt conveyor
Put the material on the moving belt, which will convey the bottle into label remover 

3. Trommel
Removing rock, stone, dust, loosen caps and small metals, especially, the iron will be removed by high speed 

4.Bottle label separator
Removing labels from bottles 

5.Manual Select working table
IF the label still in the bottle, worker can remove the label by hand 

6.Belt conveyor
Put the material on the moving belt, which will convey the bottle into crusher 

7.Crusher
Crush the material. 

8.Screw loader
Put the flakes into the Hot washer to clean. 

9.Floating washer
Cleaning flakes to remove chemicals and separating out rest labels and caps  

10.Hot washer
Connected with steam boiler. Steam is supplied into washing tank to heat water and flakes. Hot water makes waste; label and glue loosen from bottles.

11.Friction washer
After crushing material from enters the mouth, through the high speed on the axis of the blade flap and spray water to the common function of good cleaning effect. 

12.Centrifugal dryer
Rejection the water from the flakes, moisture content is less than 2% 

13.Pipe drying system
Hot air drying 

14.PVC (label) separator
Used for the PET bottles, round and pressed bottles,effective more than 98%,save energy and labor,without water 

15.Storage bunker
Storage materials

Machine Detailed Photos as a reference:
Pet Bottle Washing Line/Pet Washing Line/Waste Plastic Recycling Machine

Pet Bottle Washing Line/Pet Washing Line/Waste Plastic Recycling Machine
Pet Bottle Washing Line/Pet Washing Line/Waste Plastic Recycling Machine
Pet Bottle Washing Line/Pet Washing Line/Waste Plastic Recycling Machine


Machine Packing Details:
Pet Bottle Washing Line/Pet Washing Line/Waste Plastic Recycling Machine
Pet Bottle Washing Line/Pet Washing Line/Waste Plastic Recycling Machine
About our service:
PET Bottle washing line Before-sale:  
  1. Introduce products and applications detain
  2. Recommend suitable solution
  3. Provide with reference information
  4. Offer lab for test    
During Manufacturing:          
  1. Provide with layout and engineering conditions
  2. Inform the project processing status
  3. Offer other documents
After-sale:
1. Provide with installation, commissioning and training
2. Register and record customer information
3. Offer spare parts
4. Provide with necessary technical support for new application
5. Visit customer regularly and correct information


Why choose us:
1. Lower investment cost for a high quality and durable machine; 
2. Low energy consumption with high production output;
3. Overseas installation and training are available;
4. Machine warranty with spares in stocking and in-time delivery;
5. Fast machine delivery and installation: KWELL produces on an average of 10 sets of plastic machines per month and can deliver the machine faster than most manufacturers. The regular delivery time of an KWELL recycling machine is 30 days.

 

Please convenient yourselves by me !!
http://kwellgroup.en.made-in-china.com/

Hot Dipper Galvanized Flexible Steel Conduit

Hot Dipper Galvanized Flexible Steel Conduit,Flexible Metal Tubing,Stainless Steel Tube Expander Tool,High Pressure Stainless Steel Flexible Hose

Jiangsu Kinson Conduit Industry Co.,LTD , https://www.jskinsontube.com

Posted on