- Model NO.: ICP-MS2000
- Warranty: 1 Year
- Advantage: High Resolution
- Wavelengths: Mass Spectrometer
- Light Number: Monochromator
- Customized: Customized
- Transport Package: International Import and Export Carton
- Origin: Jiangsu Suzhou
- Application: Laboratory Instruments
- Detection Method: Mass Spectrometer
- Principle: New Spectrometer
- Dispersive Element: Mass Detector
- Certification: RoHS, ISO9001, CE
- Trademark: skyray instrument
- Specification: CE, ISO
- HS Code: 90273000
Configurations:
Inlet:Open modular sample introduction system with externally mounted atomizer is able to locate automatically
Torch Alignment:X,Y and Z axes are accurately PC-controlled,with all the adjusted parameters saved in analysis methods
Advanced plasma shielding:greatly improving sensitivity and limits of detection of light elements(ppm level)
Valve gate:PC-controlled valve to retain vacuum,facilitate assembly,disassembly and cleaning of the sampling and skimmer cones when vacuum system is on
Ion lens:Â Hexapole ion guide can transmit ions in full mass range efficiently with automatic ion focusing and tuning
Detector:ETP dual-mode detector,discrete dynode electron multiplier
Vacuum chamber:Â wireless connection
Power-off protection:automatically shut down to protect the system in case of unexpected power failure
Software:automatic control of instrument and accessories,(Â Windows 2000/XP/vista/window7,both 32 and 64 bit are ok), professional system
Â
Specifications
Mass Range:2~255 amu
Dynamic (Linear) Range:≥108Â
Sensitivity(cps/mg/L): Be≥5×106 ; In≥60×106 ; U≥60×106
Limit of Detection(ng/L): Be≤5;In ≤0.5;U≤0.5Â
Resolution (amu):0.6~0.8 amu
SNR (Signal to Noise Ratio):≥50×106Â
Background: ≤2 cps(full mass range)
Variance:≤0.05 amu/24 h
Stability( RSD): short term≤2 %;long term≤3 %
Oxides:CeO+/Ce+≤3%
Double charged:69Ba2+/138Ba+ ≤3%Â
Isotope Ratio Precision:(107Ag/109Ag)≤0.2%
Abundance Sensitivity:≤1×10-6low mass;≤5×10-7high mass
ICP-MS2000 inside constructionÂ
ICP-MS burning chamber
ICP-MS2000 software
Â
cheap plastic injection molds and mould manufacturer 1-Start from part design analysis 2-Mold design drawing and DFM report available so you can see how is the mold going to be before mold making 3-If product is complex,moldflow report will be present as well 4-In house mold making shop ensure you mold quality under well control. 5-Normally it takes 20-40 days to make mold,precise time depends on part design
Thin Wall Mold,Thin Wall Container Mould,Thin Wall Mould,Ultra Thin Wall Injection Molding
Taizhou Zijing Plastic and Mould Co.,Ltd. , https://www.zijingmould.com