Summarize:
1. CQ-P stainless steel no-leak chemical liquid pump magnetic drive pump is a new product with the working princ iple of a permanently magnetic clutch applied on a centrifugal pump and features a reasonable design, advanced technologies, full-seal, non-leak and anti-corrosion
2. It uses a static seal instead of a dynamic one so as to have the flow-passing parts in a fully sealed state, completely settling the problems of run-away, pop-up and drop unable to avoid with the mechanical seals of other pumps.Â
3. The magnetic pump features a compact structure, nice outlook, small volume, low noise, reliable run and easy use and maintenance.
4. It can be used to pump acids, alkali, oils, rare and noble liquids, toxic liquids, volatile liquids and for completing with cycling water equipments and filters in che-mical industry, pharmacy, petroleum, electric plating, food movie and photograph development, scientific research organ, national defense industry etc.
5. Especially for pumping the easily leaking, combustible and explosive liquids, it is more ideal to use this pump.
6. Suitable for transporting the liquid containing no hard grains and fiber and with the suck-in pressure not more than 0.2MPa, the maximum working pressure 1.6MPa, the density not more than 1600Kg/m3 and the graininess not bigger than 30×10-6m2 /S.
Â
Product details:
Working Principle: | Centrifugal, Magnetic drive |
Main applications: Â Â Â Â Â Â | Chemical, water, oil |
Driver: | Electric motor |
Power Specs: | 220V/380/415 V 3phase; 220/240 V 1phase; 50hz/60hz |
Max.permissible fluid temperature: | 95°C(203°F) |
Type of connection: | Flange, Tube. |
Installation position: | Horizontal |
Casing/Inner parts material: | Stainless steel 304 / 316 |
Maximum drive rating:Â | 30KW(40HP) |
Maximum caliber:Â Â | 150mm(6inch) |
Maximum discharge-side pressure: | 0.5MPa(5bar) |
Maximum head: | 50m(164ft) |
Flow rate range: Â | 30-3350L/min(7.9-884.4 US.GPM) |
Â
Performance Data:Â
Model  | Caliber  (mm) | Flow (m 3 /h)  |
Head (m) Â | Power (kW) Â |
Voltage   (V)  |
Material  | |
Inlet  | Outlet  | ||||||
14CQ-5 | 14 | 10 | 1.2 | 5 | 0.18 | 220/380 | 304 316 316L S.S |
16CQ-8 | 16 | 12 | 1.8 | 8 | 0.18 | 220/380 | |
20CQ-12 | 20 | 12 | 3 | 12 | 0.37 | 220/380 | |
25CQ-15 | 25 | 20 | 5.4 | 15 | 1.1 | 380 | |
32CQ-15 | 32 | 25 | 6.5 | 15 | 1.1 | 380 | |
32CQ-25 | 32 | 25 | 4.8 | 25 | 1.1 | 380 | |
40CQ-20 | 40 | 32 | 1 | 20 | 2.2 | 380 | |
40CQ-32 | 40 | 32 | 11.5 | 32 | 4 | 380 | |
50CQ-25 | 50 | 40 | 14.4 | 25 | 4 | 380 | |
50CQ-32 | 50 | 40 | 13.2 | 32 | 4 | 380 | |
50CQ-50 | 50 | 32 | 7.8 | 50 | 5.5 | 380 | |
65CQ-25 | 65 | 50 | 16.8 | 25 | 5.5 | 380 | |
65CQ-32 | 65 | 50 | 25 | 32 | 5.5/7.5 | 380 | |
80CQ-32 | 80 | 65 | 50 | 32 | 11 | 380 | |
80CQ-50 | 80 | 65 | 50 | 50 | 15 | 380 | |
100CQ-35 | 100 | 80 | 60 | 35 | 15 | 380 | |
100CQ-50 | 100 | 80 | 60 | 50 | 18.5 |
380 Â Â |
Company Information:
Zhejiang Yonjou Technology Co., Ltd is one of the leading manufacturers and exporters in the field of industry pumps with manufacturing facilities in mainland China. We are specialized in oil pump, diaphragm pump, diesel engine pump, centrifugal pump, screw pump, chemical pump etc.
Summarize:
1. CQ-P stainless steel no-leak chemical liquid pump magnetic drive pump is a new product with the working princ iple of a permanently magnetic clutch applied on a centrifugal pump and features a reasonable design, advanced technologies, full-seal, non-leak and anti-corrosion
2. It uses a static seal instead of a dynamic one so as to have the flow-passing parts in a fully sealed state, completely settling the problems of run-away, pop-up and drop unable to avoid with the mechanical seals of other pumps.Â
3. The magnetic pump features a compact structure, nice outlook, small volume, low noise, reliable run and easy use and maintenance.
4. It can be used to pump acids, alkali, oils, rare and noble liquids, toxic liquids, volatile liquids and for completing with cycling water equipments and filters in che-mical industry, pharmacy, petroleum, electric plating, food movie and photograph development, scientific research organ, national defense industry etc.
5. Especially for pumping the easily leaking, combustible and explosive liquids, it is more ideal to use this pump.
6. Suitable for transporting the liquid containing no hard grains and fiber and with the suck-in pressure not more than 0.2MPa, the maximum working pressure 1.6MPa, the density not more than 1600Kg/m3 and the graininess not bigger than 30×10-6m2 /S.
Â
Product details:
Working Principle: | Centrifugal, Magnetic drive |
Main applications: Â Â Â Â Â Â | Chemical, water, oil |
Driver: | Electric motor |
Power Specs: | 220V/380/415 V 3phase; 220/240 V 1phase; 50hz/60hz |
Max.permissible fluid temperature: | 95°C(203°F) |
Type of connection: | Flange, Tube. |
Installation position: | Horizontal |
Casing/Inner parts material: | Stainless steel 304 / 316 |
Maximum drive rating:Â | 30KW(40HP) |
Maximum caliber:Â Â | 150mm(6inch) |
Maximum discharge-side pressure: | 0.5MPa(5bar) |
Maximum head: | 50m(164ft) |
Flow rate range: Â | 30-3350L/min(7.9-884.4 US.GPM) |
Â
Performance Data:Â
Model  | Caliber  (mm) | Flow (m 3 /h)  |
Head (m) Â | Power (kW) Â |
Voltage   (V)  |
Material  | |
Inlet  | Outlet  | ||||||
14CQ-5 | 14 | 10 | 1.2 | 5 | 0.18 | 220/380 | 304 316 316L S.S |
16CQ-8 | 16 | 12 | 1.8 | 8 | 0.18 | 220/380 | |
20CQ-12 | 20 | 12 | 3 | 12 | 0.37 | 220/380 | |
25CQ-15 | 25 | 20 | 5.4 | 15 | 1.1 | 380 | |
32CQ-15 | 32 | 25 | 6.5 | 15 | 1.1 | 380 | |
32CQ-25 | 32 | 25 | 4.8 | 25 | 1.1 | 380 | |
40CQ-20 | 40 | 32 | 1 | 20 | 2.2 | 380 | |
40CQ-32 | 40 | 32 | 11.5 | 32 | 4 | 380 | |
50CQ-25 | 50 | 40 | 14.4 | 25 | 4 | 380 | |
50CQ-32 | 50 | 40 | 13.2 | 32 | 4 | 380 | |
50CQ-50 | 50 | 32 | 7.8 | 50 | 5.5 | 380 | |
65CQ-25 | 65 | 50 | 16.8 | 25 | 5.5 | 380 | |
65CQ-32 | 65 | 50 | 25 | 32 | 5.5/7.5 | 380 | |
80CQ-32 | 80 | 65 | 50 | 32 | 11 | 380 | |
80CQ-50 | 80 | 65 | 50 | 50 | 15 | 380 | |
100CQ-35 | 100 | 80 | 60 | 35 | 15 | 380 | |
100CQ-50 | 100 | 80 | 60 | 50 | 18.5 |
380 Â Â |
Company Information:
Zhejiang Yonjou Technology Co., Ltd is one of the leading manufacturers and exporters in the field of industry pumps with manufacturing facilities in mainland China. We are specialized in oil pump, diaphragm pump, diesel engine pump, centrifugal pump, screw pump, chemical pump etc.
Auto parts molds,Auto parts mould,Auto parts mold,Auto parts moulds,Automobile mold
Auto Parts Mold,Auto Parts Molds,Auto Parts Moulds,Auto Parts Mould
Dongguan Anding Technology Manufacturing Co., Ltd , https://www.cn-moulds.com