The weather is getting hotter and hotter, and it brings us more and more difficult car environment. In addition, there are other security risks. For example, high-temperature auto-ignition of vehicles, water ingress into rainstorm vehicles, etc. So how do we avoid these situations?
Routine inspection to prevent spontaneous combustion
The most important item in vehicle inspection is the inspection of engine oil. First check whether the amount of oil is appropriate; secondly, check whether the oil quality is up to standard.
Check the oil quality
We use the oil caliper to determine the amount of oil and whether it needs to be replenished. A small amount of oil on the oil caliper is then applied to the white paper to judge the quality of the oil by the color. If the color is tan, the oil must be replaced; the color is yellow, and the fluidity is good, it does not need to be replaced.
Check glass water
The consumption of glassy water in the summer is staggering. Apart from normal use, the portion that is evaporated by high temperature is also very large. Therefore, we must regularly check the glass water to see if it needs to be supplemented. If you do not add or feel trouble yourself, you can ask the relevant staff to help you when you wash, refuel, and maintain. In case of emergencies, pure water can be used instead of glass water. In addition, in emergency situations, we can use pure water instead of glass water. However, this is only temporary.
Check brake fluid
The replacement of brake oil is generally carried out in our daily maintenance, but it is also necessary for regular inspections to be carried out in our daily car. Under normal circumstances, we check if the amount of oil is sufficient. If it is found that it is less than normal, it is best to add it in time.
Clean the engine compartment
Dust, fallen leaves and other debris in the upper part of the engine room must also be cleaned. If oil leaks from the engine compartment, the high temperatures in the summer can easily cause the falling leaves to reach the ignition point, causing the vehicle to self-ignite.
5D Wheel Alignment With Stand Column is simple model of 5D Wheel Alignment. 5D wheel alignment with stand column has no cabinet so the machine just takes up a small space. We have new designed stand column. It makes the machine looks special and different. 5D wheel alignment with a stand column is made up by aluminum alloy. This texture is very hard and it has been tested for many years by our domestic market.
Advantages of 5D wheel alignment with stand column:
1.Without limitation of space,5D wheel alignment can be used on all kinds of lifts.
2. With 5 cameras, the reference plane is car body, so 5D wheel alignment can measure almost all kinds of vehicles, even if the vehicle is lifted.
3. 5D wheel alignment supports varied operation platforms, point to point transmission by WiFi can shied interference.
4. 5D wheel alignment is supported by powerful cloud service; 5D wheel alignment can connect to IPAD, cell phone, computer and the Internet, supporting remote operation and data upgrade.
5. Four targets are crash resistant and can be exchanged. Fix wheel claws without taking apart wheel hub cover.
6. 5D wheel alignment measurement range is wide, and it can also test wheel deviation besides all traditional parameters.
7. The optional one point wheel clamps can be installed within four seconds.
5D Wheel Alignment With Stand Column
5D Wheel Alignment With Stand Column
Shenzhen Sucvary Tech Co., Ltd. , http://www.syalignment.com