CNBM Heavy Duty Shelving, also known as pallet rack, is the most common storage system in all classes of enterprises, suitable for storing various products in multiple varieties and large batch. With large bearing power, the capacity of each storey can reach 3,000 kg at most.
Â
2. Main Features of CNBM Heavy Duty Shelving
1) The heavy duty pallet rack is made of cold-rolled plates by rolling and shaping. The high quality square steel is adopted for beam, which is large in bearing power and difficult of distortion.
2) The heavy duty rack, which is assembled by uprights, beams, cross struts, slanted struts and self-locking bolts, can effectively prevent bolts from looseness to cause destabilization of rack.
3) The cold rolling P-type enclosed beam made specially is adopted for rack beam, which structure is characterized by simpleness, reliability, light weight, strong bearing power and low cost.
4) The fastener connected with upright is matched with safety pin, which can ensure that the beam would not fall off under impact of external force.
Â
3. Main Application of CNBM Heavy Duty Shelving
1) Electronic industry;
2) Logistics;
3) Commercial display;
4) Storage;
5) Supermarket, etc.
Â
4. Specification of CNBM Heavy Duty Shelving
Â
5. CNBM Introduction
China National Building Material Group Co., Ltd (CNBM Group) is the largest state-owned comprehensive building materials industry group company in China. It was founded in 1984 upon the approval of China State Council, with products as various kinds of building materials, decoration materials, furniture, equipments, etc. It has been ranked as one of the World Top 500 Enterprises for 6 successive years and No. 2 in world building materials industry.
Up until the end of 2016, CNBM owns total assets of over 550 billion RMB, with employees of over 250,000, annual turnover of 300 billion RMB. Among all CNBM subordinate companies, 15 of them are listed. CNBM owns 26 national research institutes, with 38000 scientists, 33 national industry inspection center, over 8000 patents, 11 national research & technical center, and 18 standard draft committee.
Â
Longlived 316 Stainless Steel Shot is made from high quality 316 stainless steel. It has higher quality than 410 or 430 Stainless Steel Shot. It can not only strengthen the surface of parts but also make them have some anti-corrsion ability.
316 Stainless Steel Shot
Chemical Composition (%)
|
C |
Si |
Mn |
P |
S |
Ni |
Cr |
N |
Mo |
Cu |
|
0.066 |
0.39 |
1.10 |
0.035 |
0.002 |
10.06 |
16.36 |
0.049 |
2.06 |
0.62 |
Size: 0.25mm-3.0mm Other size could also be customized.
Shape: ac cut, G1, G2, G3 and G4.
If have other requirment, please connect with me and we will always serve you.
316 Stainless Steel Shot,Sus316 Stainless Steel Shot,,Stainless Steel Ball Shot
Longlived Metal Products Co ., Ltd , https://www.stainlesssteelshotcn.com