Forever Splitter Forever

Introduction: The history of local stone industry in Ya'an, Sichuan Province. In the 1980s, Lushan had a stone processing industry. In 1992, he was engaged in the stone business in Lushan, and the main product was granite. “At that time, China Red, produced in Lushan, was the best quality granite, but this mine is now extinct.”

The Forever Splitter The Forever Splitter

Since the late 1990s, Lushan has slowly transformed from a stone mining industry to a fine stone processing industry.

“All are rugged cliff roads. There are a lot of sharp corners on the road and there are cliffs on the roadside. The big trucks are up to test the driver's courage and level.” Although the mine's value is rising, Li Hua cannot directly realize it.

“The state stipulates that mines cannot be resold, otherwise they will be recovered.” In order to expand the scale of production, it can only be found in partnerships, which has become the most commonly used business strategy for many mine owners in Baoxing County. Now, Li Hua’s factory has four shareholders, all of whom were in 2011 and 2012.

Today, about 67.0 percent of the Baoxing mines are bought by foreigners, including Taiwan businessmen. On the one hand, some people have insufficient funds for exploitation. On the other hand, the country requires standardized management and exploitation, and it cannot launch artillery. Miners can only rely on selling shares to finance.

Hanlong Stone Co., Ltd. is the largest stone company in Baoxing County. In 2008, shortly after the Wenchuan earthquake, Sichuan Hanlong Stone Co., Ltd. was registered and established. Several Sichuan bosses jointly invested more than 60 million yuan in Baoxing to buy three mines. "Afterwards, the annual investment will be 100 million yuan. At present, companies have invested more than 300 million yuan.

Due to the huge demand for reconstruction after the Wenchuan disaster and the country’s booming real estate development, Baoxing’s stone industry quickly warmed up and developed.

Shanxi Zhongde Science and Technology Co., Ltd. began to vigorously research and develop environmental protection static mining equipment as early as in 2000. DEUTSCHE Engineering was founded in 1999 and registered in 2000. It has been the earliest research and development equipment manufacturer in China for 17 years.

The earliest companies that had joint ventures with Sino-German joint ventures to mines have been close to 20 German engineers for more than 200 years in the 17 years.

The Yugong Axe Power Splitter developed by Sino-German Science and Technology Co., Ltd. has traditional technical advantages and sophisticated manufacturing processes, and adapts to various adverse conditions. The Yugong Axe is a large force splitter (also known as a splitter or a rock breaker). Mainly consists of cylinders, piston rods, control valves, oil pipelines, wedges, etc., installed on excavators, using ultra-high pressure hydraulic system as a drive source, only need 60MPa (600kg/cm2) pressure can produce 5,000 tons splitting force (currently The only equipment in the country that has passed the market test to achieve this technical parameter), according to destructive test data, shows that on rocks with a Mohs hardness greater than 8 the dismantling efficiency of the splitter is more than five times that of the breaker. The rock in the foundation pit of the modern building is facing the problems of incapability of putting pao, rock too hard, and low efficiency of the breaker. Using drilling machines, powerful extensions and breaking hammers are the best solutions, and it is also cost saving and improvement. The best combination of equipment for operating efficiency. A large-scale earth and rock project adopts this joint operation, and the profit will increase by more than 10 times. This mode of operation has now entered the field of engineering demolition. It is the best equipment for saving costs and improving operational efficiency.

Yugong Axe large-scale hydraulic splitter is widely used in mining, rock foundation pit excavation, high hardness rock division, earthquake relief and other industries. It has been put into use in more than 30 countries and regions in the world and has been recognized and affirmed by customers.

Aluminum Baler

Hydraulic Aluminum Metal Baler used to crush, cut and bale a wide range of scrap metal. They could deal efficiently and quickly with metals scraps, whether it`s something as small as Cans, Aluminium and steel turnings and Wire scrap, or as large and robust as steel sheet, washing machines, other white goods and whole vehicles. Choose a hydraulic metal baler metal benefit from a reliable and fit-for-purpose solution for your recycling needs.

Aluminum Shavings Baler, Aluminum Turnings Baler, Aluminium Profile Baler, Aluminum Scraps Baler

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecobriquetter.com

Posted on