Illustration of working principle:
Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the diamond size takes place. Different gap sized. After passing from the die of diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to the next stitch to take place.
Application: Chain Link Fence is extensively used as fences for playground and gardens, highway, railway, airport, port, residence, etc.
Advantages:
1. It adopts the technique of single model and double helix and it can improve the work efficiency greatly.
2. Japan Mitsubishi PLC (Programmable Logic Controller)
3. French Schneider inverter
4. Chinese top servo motor (make the production more precise).
5. There are two ways for the side of chain link fence, one is twisted the other is with burr in edge.
6. There is a controller cabinet hanging and it can set the length of the wire mesh, once the weaving finish, it will stop.
7. An alarm device has been installed, once the production is completed, the alarm will ring. There is a limit switch and it can stop immediately.
8.Speed of die:500r/min
II.Technical Parameter
| Model | LW30/80-3/4 | |
| Width scope of weaving | ≤3m/4m | |
| Mesh scope of weaving | 25mm-80mm | |
| Wire scope | 3mm | |
| Outside size | Main machine | 6700*1430*1800 |
| Net reel | 5100*1700*1250 | |
| Motor | Servo Motor | 5.5kw |
| Cutter | 1.5kw | |
| Rolling | 0.75kw | |
| Raw Material | Galvanized wire;PVC bag steel wire | |
| Diameter of Wire | Mesh opening size |
| 1.8mm | 30-40mm |
| 2.0mm | 30-50mm |
| 2.2mm | 30-60mm |
| 2.5mm | 40-70mm |
| 2.8mm | 50-80mm |
| 3.0mm | 60-80mm |
| 3.2mm | 70-80mm |
| 3.5mm | 80-100mm |
| 4.0mm | 100mm*100mm |
1. FOB CIF CFR price all available
2. Payment: 30% T/T in advance, the balance 70% by T/T after check the machine at seller's factory.
3. Minimum order quantity: 1Â set
4. Certification: ISO 9001 Certificate
5. Delivery time: 30 days from received your payment in advance.
6. Country of origin: China
7. Our guarantee time: 12 months after the equipment is accepted by the buyer, however, the guarantee period is no longer than 18 months after equipment's departure from Xingang port, China.
8. Installation: we could arrange our engineer install the machine in our factory.
V.Contact Information
Â
Â
Â
Â
Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine.
Leisuwash 360 touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
The contactless robotic automatic robot leisuwash 360 is the newest technology of contactless high-speed automatic washing of cars. Fully automated process of contour washing and drying of the car in combination with the technological capabilities of self-service (payment, choice of car wash programs) provide high-quality contactless washing services in the absence of staff.
Machine Car Wash,Leisuwash 360 Plus,Automatic Express Car Wash,Touchless Car Wash
Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdlaserwash.com