Causes and Solutions for Overheating of Automotive Engines
Engine overheating is a common failure, it will cause the engine power generation, economic decline, in severe cases, will also damage the parts, so this type of fault should be ruled out in time. The following solutions to eliminate high engine temperature failures.
Found that the temperature is too high or the temperature indicator keeps flashing, to stop and check to see if the tank cooling water is normal, there is no leakage in the water tank, water pipes and joints. If no abnormality is found through the external inspection, you can press It is required to make up for cooling water before continuing to drive. If you still find that the temperature is too high after you have traveled a certain distance, you will find that the cooling water is reduced by a large number of parking inspections. This is mostly due to the loss of the water jacket of the cylinder block with sand holes or perforations. After that, maintenance should be carried out. Do not take it lightly.
When the engine temperature is too high, you can use the hand to touch the temperature of the water pipe and submerged pipe to determine the fault. If the temperature difference between the two pipes is very large, it can be judged that the thermostat does not work. If no accessories can be purchased on the way, Dismantle the thermostat emergency and replace it immediately after the unit is returned.
If there is air in the cooling system, air resistance will be formed, resulting in poor circulation of the cooling water, which will lead to excessive engine temperature. The following practices may be used to deflate: Let the engine run at a high speed and gently open the tank cover until gas is released. There will be part of the cooling water flowing with the gas, so repeated many times, until you feel the gas is discharged (at this time touch the hand, the water temperature will be significantly different). After troubleshooting, should be promptly added cooling water.
If the vehicle is driving on dirt roads or muddy roads for a long time, some dirt will adhere to the radiator. Over time, it will affect the heat dissipation effect and cause the water temperature to be too high. You can blow the radiator grille with compressed air and then rinse it with water pipes. .
Glass Clamps
Stainless Steel Glass Clamps for 38.1mm, 50.8mm tubes and 6-12mm glass.
Stainless steel glass clamps are available for glass railing systems. This range comes in a variety of style and option. they can be D type or square type according to your design. And they can have a flat back or radius back, depending on the mounting surface they are being fixed. Additionally, our stainless steel glass clamps are available in exterior (Grade 316 Stainless Steel, Mirror Polished) and interior applications (Grade 304 Stainless Steel, Satin Finish).
Glass Clamps,Glass Fittings,Glass Railing Fittings,Stainless Steel Glass Clamps
Dongying Highco Metal Manufacturing Co.,Ltd. , https://www.highco-metalcn.com