Automotive parts and new materials are in short supply In the survey conducted by Great Wall Securities, Lianjian Optoelectronics made it clear that 2016 was a year in which small-pitch LED displays ushered in explosive growth. In the first half of 2017, this trend continued. The company’s wholly-owned subsidiaries jointly built limited-pitch product revenue for three consecutive years from 2014 to 2016 and maintained high growth rates, reaching 105 million yuan, 148 million yuan, and 274 million yuan respectively, and further increased to 194 million yuan in the first half of this year. Year-on-year increase of 166.33%.
Also benefiting from the shortage of small-pitch LED products is Liad. On September 28, when the company received an investigation from the Fund of E Fund and other institutions, as of August 18, the company signed a new contract of 1.55 billion yuan for small-pitch televisions (which belong to the small-pitch LED industry), an increase of 41% over the same period of last year. From January to June 2017, the revenue was 784 million yuan, an increase of 62.58% over the same period of last year. During the reporting period, the gross margin of TV with small gaps remained at 40.93%. In terms of industry prospects, Liardan’s secretary-general Li Nannan predicts that 2016-2018 is the LED outbreak of small-pitch TVs, and the industry’s growth rate will remain basically between 40% and 60%. At the same time, overseas markets are gradually recognizing small-pitch televisions, and once the outbreak will bring greater market space.
The hot market for new energy vehicles has caused orders for listed companies in the industrial chain to increase significantly. The precision forging technology that recently invested in new energy automotive gear production projects clearly stated in the joint research of the organization that so far the supply of products is still in short supply. Although the completion rate of orders in the second quarter was more than 70%, which was better than the first quarter, the pressure on delivery was still relatively large. From the current point of view, orders in the second half of the year will continue to maintain the growth trend in the first half of the year.
Survey documents show that precision forging technology will output more than 50 million pieces this year. In the face of this shortage of supply, the company will simultaneously carry out technological transformation to increase production capacity. Specific measures include the construction of new project plants. For this purpose, 150 acres of land will be newly acquired this year. The company said that this will effectively support the increase in production capacity in the later period.
Keheng, which specializes in the development of high-performance rare earth luminescent materials and lithium-electric materials, revealed earlier this month that Sinopec Corp.’s 500-ton/month project in Jiangmen and the 300-ton/month production capacity in Yingde project are basically full. Monthly production and sales of 800 tons. Due to the fact that the production capacity is basically full, the expansion plan of Yingde Germany's second phase of not less than 3,000 tons/year will accelerate, and preliminary construction work has begun. It is expected that capacity will be formed in the first quarter of next year. The company's future positive electrode material production center will be mainly in Britain and Germany.
In the field of new materials, Luyang energy conservation said in an investigation by an agency that the company's rock wool products are in short supply. It is expected that the company's rock wool sales volume will reach 70,000 tons in 2017. Affected by the increase in raw material prices and market demand, the price of rock wool this year has risen by 300 to 500 yuan per ton compared to last year.
In order to meet the growing market demand, the company plans to invest 76 million yuan to build an expansion project with an annual output of 50,000 tons of rock wool products. At present, the work of equipment purchase and other work has started, and it is striving to produce one line at the end of the first quarter of next year, and it is expected to start production by May next year.
In addition, Sanchao New Materials also said that the company's orders were full and the capacity utilization rate was still at a relatively high level during the survey conducted by the agency. This was due to the explosive growth of downstream demand for its diamond products.
Injection molding is the most commonly used manufacturing process for Plastic Parts. The use of injection molding to manufacture various products varies greatly in size, complexity and application. The injection molding process requires the use of injection molding machines, raw plastic materials and molds. The plastic is melted in an injection molding machine and then injected into a mold, where it cools and solidifies into the final part. Injection molding is used to produce thin-walled plastic parts for various applications, the most common of which is the plastic shell. Plastic shell is a thin-walled shell, which usually needs many ribs and protrusions indoors. It is used for various kinds of electric appliances, including electric tools, instrument panels, and consumer electronics. Other common thin-walled products include different types of open containers, such as barrels. Injection molding is also used to produce several daily necessities, such as toothbrushes or small plastic toys. Many medical devices, including valves and syringes, are also manufactured using injection molding
Vacuum Cleaner Accessories,Vacuum Cleaner Parts Accessories,Dry Vacuum Cleaner Accessories
Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjinjectionmolding.com