Aohai Marine Fittings Co., Ltd mainly produce:
HALL ANCHOR TYPE A B C,
SPEKE ANCHOR,
JAPAN STOCKLESS ANCHOR,
U.S.N STOCKLESS ANCHOR,
MATROSOV HIGH HOLDING POWER ANCHOR,
NAVY ANCHOR,
DANFORTH HIGH HOLDING POWER ANCHOR,
BALDT STOCKLESS ANCHOR,
AC14 HIGH HOLDING POWER ANCHOR,
DELTA ANCHOR
POOL ANCHOR
anchor chain, kenter shackle, end shackle and swivel etc.
We have 15 years experience in anchor chain production and our customers include:Â COSCO,CSCL,EVERGREEN,PIL,MEARSK,OOCL,"K"Â LINE,CMA-CGM etc.
Â
Certificate: ABS, LR, KR, BV, NK, DNV, RINA, RS, IRS,CCS etc.
2.Product description:
Â
A B C TYPE HALL ANCHOR
Halls anchor is a stockless bow anchor type.
The Halls anchor is one of the most popular anchors designed to fit anchor pockets on most ships.
Weight: 40KGS-46000KGS
Halls anchors are normally supplied with certification and these can be from any of the major classification societies: CCS, ABS, BV, GL,KR, NK, IRS, DNV etc.
3.Details:
Â
| ANCHOR TYPE | SIZE |
| HALL ANCHOR TYPE A B CÂ | 40KG-46000KG |
| SPEKE ANCHOR | 100KH-26000KG |
| JAPAN STOCKLESS ANCHORÂ | 180KG-46000KG |
| U.S.N STOCKLESS ANCHOR | 300KG-30000KG |
| MATROSOV HIGH HOLDING POWER ANCHOR | 25KG-1500KG |
| NAVY ANCHOR | 50KG-10000KG |
| DANFORTH HIGH HOLDING POWER ANCHOR | 60KG-25000KG |
| BALDT STOCKLESS ANCHOR | 200KG-50000KG |
| AC14 HIGH HOLDING POWER ANCHOR | 56KG-100000KG |
| DELTA ANCHOR | 300KG-100000KG |
| POOL ANCHOR | 105KG-30000KG |
4.Photos for reference:
High flux tube is a kind of high efficiency heat exchanger tube which sinters a layer of porous surface with special structure on the inner surface of ordinary heat exchanger tube by powder metallurgy method.
• The holes in the surface porous layer are connected with the holes, which can significantly enhance boiling heat transfer. With grooves on the outer surface, the heat transfer effect can be increased by more than 10 times.
• High Flux Tube is tube element with the highest heat transfer coefficient up to now.
High flux tube can be classified into three groups: Sintered high flux tube, Sprayed high flux tube and Machined high flux tube. Among them, sintered high flux tube is the most expensive for its complex processing method and high efficiency; machined high flux tube is applied to mediums with high surface tension, its performance is in between; sprayed high flux tube is the cheapest for its easy process and low efficiency.
Compared with the bare tube, the sintered surface porous tube has the following advantages:
(1) it can significantly enhance the boiling heat, reduce the heat transfer area of about half, and have broad application prospects in the chemical and petrochemical plants such as large ethylene and large aromatics.
(2) in a very small difference in the maintenance of boiling, low taste energy recovery and low temperature boiling heat transfer has a great value, can be used to reduce the temperature of the heating steam.
(3) the critical heat load is more than 50% higher than that of the ordinary pipe.
(4) has good scale inhibition performance.
Copper High Flux Tubes,Aluminum High Flux Tubes,Stainless Steel Flux Tubes,Carbon Steel Flux Tubes
Murphy Thermal Energy Co., Ltd. , https://www.murphyfinnedtube.com